Buttons shall have square shoulders, be 3/4 inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
Search Results "Side Transfer Surface"
Filters
Commonly Searched Documents
-
11B-411.2.1.5.1 Size
-
11B-813.2.1.3 Height and operation
Adult changing table height shall be adjustable from 17 inches (432 mm) above the floor or ground to 38 inches (965 mm) above the floor or ground, as measured to the top of the changing surface...
-
APPENDIX B
OUTSIDE SURFACES Figure 27: Pictures and Roughness Index of Outside surfaces...
-
I. Payment of Civil Penalties to the United States
. § 12188(b)(2)(C), no later than 60 days after the effective date of this Agreement by electronic funds transfer pursuant to written instructions to be provided by the United States Attorney...
-
§8.50(c)(1)
(1) Where Federal financial assistance is provided in the form of real property or interest in the property from the Department, the instrument effecting or recording this transfer shall...
-
§104.5(c)(1)
(1) Where Federal financial assistance is provided in the form of real property or interest in the property from the Department, the instrument effecting or recording this transfer shall...
-
Question 4
What types of training programs are available to provide information to staff on lifting and transferring patients with disabilities?...
-
§1630.14(d)(4)(iv)
(iv) A covered entity shall not require an employee to agree to the sale, exchange, sharing, transfer, or other disclosure of medical information (except to the extent permitted by this...
-
Turning Space: ADA Standard Section 809.2.2
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
11B-505.10.3 Bottom extension at stairs
Extension shall return to a wall, guard, or the landing surface, or shall be continuous to the handrail of an adjacent stair flight....
-
[2010 ADAS] 105.2.3 ASTM
ASTM F 1292-99 and ASTM F 1292-04 establish a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and...
-
406.2 Counter Slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20....
-
11B-802.1.3 Depth
Where a wheelchair space can be entered only from the side, the wheelchair space shall be 60 inches (1524 mm) deep minimum. Advisory 11B-802.1.3 Depth. ...
-
11B-604.6 Flush controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with Section 11B-604.8.2....
-
11B-604.6 Flush controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with Section 11B-604.8.2....
-
11B-802.1.3 Depth
Where a wheelchair space can be entered only from the side, the wheelchair space shall be 60 inches (1524 mm) deep minimum. Advisory 11B-802.1.3 Depth....
-
11B-802.1.3 Depth
Where a wheelchair space can be entered only from the side, the wheelchair space shall be 60 inches (1524 mm) deep minimum. Advisory 11B-802.1.3 Depth....
-
11B-604.6 Flush controls
Flush controls shall be located on the open side of the water closet except in ambulatory accessible compartments complying with Section 11B-604.8.2....
-
Irwin Seating Company ADA Swing-Away Aisle Panels
Many aisle end panels can be manufactured to swing open to allow an individual to transfer between a wheelchair and the theatre chair....
-
A. DEFINITIONS AND BACKGROUND
than 8.3%) ramps and curb ramps; -inaccessible patient rooms and toilet rooms; -inaccessible showers; -toilet seats that are mounted too high; -toilets not centered at 18" from the side...
-
1134A.7 Water closets
Water closets shall be located within bathrooms in a manner that permits a grab bar to be installed on at least one side of the fixture....
-
707.6.3.1 Contrast
Function keys shall contrast visually from background surfaces. Characters and symbols on key surfaces shall contrast visually from key surfaces....
-
707.6.3.1 Contrast
Function keys shall contrast visually from background surfaces. Characters and symbols on key surfaces shall contrast visually from key surfaces....
-
A4.30.8 Illumination Levels
Illumination levels on the sign surface shall be in the 100 to 300 lux range (10 to 30 footcandles) and shall be uniform over the sign surface....
