Primary entry doors, required exit doors or secondary exterior doors with changes in height between the interior surface or floor level and the exterior surface or floor level shall comply...
Search Results "Hybrid Surface System"
Filters
Commonly Searched Documents
-
1132A.4 Level floor or landing
-
Chapter 9: Built-In Elements
Chapter 9 covers built-in elements, including dining surfaces and work surfaces (902), benches (903), and sales and service counters (904)....
-
Handrail Extensions
ADAAG does not require handrails on sloped surfaces that have a rise of less than 6 inches or a projection less than 72 inches, or a slope of 1:20 (5%) or less....
-
Acknowledgments
Acknowledgments The development of objective surface measurement devices and objective surface testing was conducted with funding from the National Center for Medical Rehabilitation Research...
-
R305.2.3 Blended Transitions
On blended transitions, detectable warning surfaces shall be placed at the back of curb....
-
Q: What types of telephone emergency services are covered by Title II of the ADA?
telephone emergency services" applies to basic emergency service -- police, fire, and ambulance -- that are provided by public safety agencies, including 9-1-1 (or, in some cases, seven-digit) systems...
-
12182(b)(2)(B)(i) Accessibility
(i) Accessibility It shall be considered discrimination for a private entity which operates a fixed route system and which is not subject to section 12184 of this title to purchase or...
-
501.1 Scope
Examples of platforms are: desktop operating systems; embedded operating systems, including mobile; web browsers; plug-ins to web browsers that render a particular media or format; and sets...
-
11B-705.2 Detectable directional texture
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised 0.2 inch (5.1 mm) from the surface...
-
Gratings [4.5.4]
These requirements apply to gratings located in any walking surface, including courtyards and plazas, not just those on accessible routes....
-
11B-705.2 Detectable directional texture
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm) , with bars raised 0.2 inch (5.1 mm) from the surface...
-
1133A.4.1 Repositionable countertops
Repositionable countertops shall comply with the following: Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28...
-
5.3.2.3 Slope
The slope of the turning space and clear floor or ground space surface shall not be steeper than 1:48 (2 percent) in all directions....
-
Floor Naming and Numbering
We have no system that says, “Here’s how to number a building.” There are certain conventional standards, but there’s nothing that says, “This is the best-practices way to do it.”...
-
12143(c)(1)(A)(ii)
assistance) to board, ride, and disembark from any vehicle which is readily accessible to and usable by individuals with disabilities if the individual wants to travel on a route on the system...
-
12162(e)(2)(A)(i) General rule
considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a responsible person to fail to make existing stations in the intercity rail transportation system...
-
410.6.3 Interoperability (Section-by-Section Analysis)
Interoperability (Section-by-Section Analysis) This section proposes that, where ICT with real-time two-way voice communication operates outside of a closed network or connects to another system...
-
§ 37.123(e)(2)
assistance, to board, ride and disembark from any vehicle which is readily accessible to and usable by individuals with disabilities if the individual wants to travel on a route on the system...
-
Location and Size
The side rails are 20 inches minimum in length, 6 inches minimum in height above the table surface, and 1 inch measured horizontally from the adjacent edge of the table surface....
-
Re: Stair widths
( I am listing this here, because the current system only allows you to select from a list of previously entered references. :-\ )...
-
3.2 Study Limitations and Other Issues
warning surface and the luminance contrast of the warning surface with adjacent surfaces....
-
Clearance
Section 403.5 specifies a continuous clearance of 36 inches minimum for walking surfaces....
-
M307.2 Tactilely Discernible (Section-by-Section Analysis)
Patients who are blind or have low vision have difficulty distinguishing a flat membrane button or similar control unless it is tactilely discernible from the surrounding surface and any...
-
Routes and Destinations: ADA Standard Section 810.6.2
Signs covered by this requirement shall, to the maximum extent practicable, be placed in uniform locations within the system....