* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
Search Results "Brand Standards"
-
Error/Omission: Parts of an accessible route with slopes that exceed 1:20 lack required features including handrails and edge protection.
-
Error/Omission: The shape of the door hardware requires tight grasping, pinching, and twisting of the wrist to use.
* Asterisk denotes that related, non-mandatory material is in the Appendix to the Standards....
-
Section 35.151(b)(3) Alterations to historic facilities (Section-by-Section Analysis)
Currently, the regulation provides that alterations to historic facilities shall comply to the maximum extent feasible with section 4.1.7 of UFAS or section 4.1.7 of the 1991 Standards....
-
11B-216.7 Elevators
Existing buildings that have been remodeled to provide specific elevators for public use that comply with these building standards shall have the location of and the directions to these...
-
11B-810.2.2 Dimensions
Access Board's Note to Reader: The Department of Transportation's ADA Standards indicate that compliance is required to the extent construction specifications are within a public entity's...
-
General Provisions
All fixed route operators providing complementary paratransit must make service available at least to individuals meeting these standards....
-
11B-707 Automatic teller machines, fare machines and point-of-sale devices
Federal procurement law requires that ITMs purchased by the Federal government comply with standards issued by the Access Board under Section 508 of the Rehabilitation Act of 1973, as amended...
-
11B-806.3 Guest rooms with communication features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility....
-
WHEELCHAIR
A chair mounted on wheels to be propelled by its occupant manually or with the aid of electric power, of a size and configuration conforming to the recognized standard models of the trade...
-
11B-806.3 Guest rooms with communication features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility. ◼...
-
11B-607.2 Clearance
[2010 ADA Standards] 607.2 Clearance. Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
-
11B-705.1.1.2 Dome spacing
[2010 ADA Standards] 705.1.2 Dome Spacing....
-
11B-407.3.4 Door and signal timing
[2010 ADA Standards] 2. Destination-oriented elevators shall not be required to comply with 407.3.4....
-
11B-810.2.2 Dimensions
Access Board's Note to Reader: The Department of Transportation's ADA Standards indicate that compliance is required to the extent construction specifications are within a public entity's...
-
11B-703.4.1 Height above finish floor or ground
[2010 ADA Standards] 703.4.1 Height Above Finish Floor or Ground....
-
806.3 Guest Rooms with Communication Features
For headset or external amplification system compatibility, a standard subminiature jack installed in the telephone will provide the most flexibility....
-
604.2 Location
ETA Editor’s Note: The prior standards allowed construction tolerances to occur on either side of an 18” absolute dimension....
-
610.3 Shower Compartment Seats
Where a seat is provided in a standard roll-in shower compartment, it shall be a folding type, shall be installed on the side wall adjacent to the controls, and shall extend from the back...
-
3.1 Refining MDE Definition and Committee Scope
Is there an equivalent means of facilitation that meets current standards of care for performing the diagnostic test?...
-
Corada's ADA Product Certification FAQs
The Corada Product Certification program offers three levels of certification, Standard, Silver, and Platinum....
-
Coordination of Overlapping Federal Requirements
The ADA directs the agencies with enforcement authority for these legal requirements to coordinate their activities to prevent duplication and avoid conflicting standards....
-
Section 1630.2(j)(1) Rules of Construction
substantially limits' in the ADA” and “we believe that the level of limitation, and the intensity of focus, applied by the Supreme Court in Toyota goes beyond what we believe is the appropriate standard...
-
More Steps Toward Access
Designing Facilities: When selecting design professionals such as architects and engineers to design your buildings and outdoor facilities, find out how much expertise they have with the ADA Standards...
-
a. Transfer Surface Adjustability
The Access Board sought public comment in the MDE NPRM preamble on whether the final standards should require the height of the transfer surface to be adjustable from 17 inches minimum to...
