REVIEW - Study all construction and remodeling projects in progress to minimize future problems with “readily achievable” barrier removal and/or failure to meet the “readily accessible” standard...
Search Results "Brand Standards"
Filters
Commonly Searched Documents
-
ADA Facilities Compliance Strategies for Private Entities
-
Comments
transportation commenters suggested that a longer-term solution to the problem would be to work with wheelchair manufacturers and the Department of Health and Human Services to establish standards...
-
206.2.3 Multi-Story Buildings and Facilities
Florida requirements may be waived down to the ADA Standards requirements....
-
§35.161 Telecommunication Devices for the Deaf (TDD's) (Section-by-Section Analysis)
The relay services required by title IV would involve a relay operator using both a standard telephone and a TDD to type the voice messages to the TDD user and read the TDD messages to the...
-
T402 Ramps and Bridgeplates
important that any potential revision of requirements for minimum design loads for ramps be coordinated with design loads for public lifts specified in the Federal Motor Vehicle Safety Standards...
-
409.1 General (Section-by-Section Analysis)
This proposed requirement in 409.1 would be new to the 508 Standards....
-
D. Second Advance Notice of Proposed Rulemaking (2011 ANPRM)
More importantly, we needed to obtain further public comment on major issues and harmonize with the European Commission’s ICT standardization efforts that were already underway at that time...
-
Water Hydrants
Standard handpumps require a force greater than 5 pounds (2.2 newtons) and a long reach to operate....
-
A. Question 1: Applicability of Section 904.4.1’s Exception
service counter be “36 inches (915 mm) high maximum above the finish floor,” and Section 904.4.1 further requires that a sales or service counter be “36 inches (915 mm) long minimum.” 2010 Standards...
-
EXHIBIT A: EDX WEBSITE ACCESSIBILITY POLICY
Guidance on Applying WCAG 2.0 to Non-Web Information and Communications Technologies (“WCAG2ICT”) for non-web software and content; and the Digital Accessibility Information System (“DAISY”) Standard...
-
III-4.4600 Seating in assembly areas
The ADA accessibility standard for alterations requires wheelchair seating to be dispersed (i.e. , provided in more than one location) only in assembly areas with fixed seating for more...
-
III-1.7000 Relationship to title II
In cases where the standards differ, the stadium would have to meet the standard that provides the highest degree of access to individuals with disabilities....
-
F - number system
F - number system The F - number system, ASTM E 1155, Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers, was developed primarily to aid in the construction...
-
Knee and Toe Clearance (M303.2.4)
The Access Board is considering requiring in the final standards the dimensions for toe clearance and knee clearance recommended by the Wheeled Mobility Anthropometry Project....
-
11B-703.4.2 Location
[2010 ADA Standards] 703.4.2 Location. Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
Caroma® USA Sydney Low Profile 270 Easy Height Round Front Plus Toilet
The dimensions in this sheet may change with amendments to the standards....
-
Allegion LCN 5030 Series Overhead Concealed Door Control
Features and Benefits UL listed with regular arms for self-closing doors Tested and certified under ANSI Standard A156.4 Specifications Standard 5030 series...
-
Cal-Royal Legacy Series Locksets
installation fast and east Push button releae on entrance & privacy from inside by turning lever 2-3/8" or 2-3/4" 4-way adjustable backset, size 1" x 2-1/4" round corner standard...
-
Inpro Corporation ENDURANT® Floor-to-Ceiling Mounted Partitions
hose-down maintenance Graffiti resistant and cleans without ghosting Repairable and renewable with easy sanding Class A Fire Rated GREENGUARD® certified Standard...
-
Allegion LCN 5010 Series Overhead Concealed Door Control
Features and Benefits UL listed with regular arms for self-closing doors Tested and certified under ANSI Standard A156.4 Specifications Standard 5010 series...
-
Feature 1 - Parking and Passenger Drop-Off Areas
ADA Standards for Accessible Design | Temporary Barrier Removal Suggestions for Accessible Features...
-
Parking
The chart below indicates the number of accessible spaces required by the 2010 Standards. One of every six spaces must be van accessible....
-
Section 35.151(g)(2)
wheelchair spaces and companion seats on one side of the facility only, is consistent with the Department’s enforcement practices and reflects its interpretation of section 4.33.3 of the 1991 Standards...
-
Proposed Section 36.309 Purchase of Furniture and Equipment (Preamble, Section-by-Section Analysis)
the final rule because the Department has determined that its requirements are more properly addressed under other sections, and because there are currently no appropriate accessibility standards...
