Transfer supports shall be provided for use with the transfer sides required by M302.2.3 and shall comply with M305.2....
Search Results "Shall"
-
M302.3.1 Transfer Supports
-
11B-206.1 General
Accessible routes shall be provided in accordance with Section 11B-206 and shall comply with Division 4....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
11B-705.1.1 General
Detectable warnings shall consist of a surface of truncated domes and shall comply with Section 11B-705....
-
11B-206.1 General
Accessible routes shall be provided in accordance with Section 11B-206 and shall comply with Division 4....
-
11B-903.7 Wet locations
Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate water....
-
11B-813.2.1 Adult changing table
Adult changing tables shall be fixed to the floor or a wall and shall comply with Section 11B-813.2.1....
-
11B-707.6.1 Input controls
At least one tactilely discernible input control shall be provided for each function....
-
810.4 Bus Signs
Bus route identification signs shall comply with 703.5.1 through 703.5.4, and 703.5.7 and 703.5.8....
-
11B-802.3.1 Alignment
In row seating, companion seats shall be located to provide shoulder alignment with adjacent wheelchair spaces....
-
802.3.1 Alignment
In row seating, companion seats shall be located to provide shoulder alignment with adjacent wheelchair spaces....
-
707.6.1 Input Controls
At least one tactilely discernible input control shall be provided for each function....
-
1009.4.3 Wall Depth and Length
The depth of the transfer wall shall be 12 inches (305 mm) minimum and 16 inches (405 mm) maximum....
-
409.1 General
Private residence elevators that are provided within a residential dwelling unit required to provide mobility features complying with 809.2 through 809.4 shall comply with 409 and with ASME...
-
707.6.1 Input Controls
At least one tactilely discernible input control shall be provided for each function....
-
802.3.1 Alignment
In row seating, companion seats shall be located to provide shoulder alignment with adjacent wheelchair spaces....
-
409.1 General
Private residence elevators that are provided within a residential dwelling unit required to provide mobility features complying with 809.2 through 809.4 shall comply with 409 and with ASME...
-
404.2.4 Maneuvering Clearances
Minimum maneuvering clearances at doors and gates shall comply with 404.2.4....
-
11B-505.10.1 Top and bottom extension at ramps
Ramp handrails shall extend horizontally above the landing for 12 inches (305 mm) minimum beyond the top and bottom of ramp runs....
-
1134A.5, Item 3
Faucet controls and operation mechanisms shall be operable with one hand and shall not require tight grasping, pinching or twisting of the wrist....
-
4.3.8 CHANGES IN LEVELS
Changes in levels along an accessible route shall comply with 4.5.2....
-
ยง1193.37 Information pass through.
Telecommunications equipment and customer premises equipment shall pass through cross-manufacturer, non-proprietary, industry-standard codes, translation protocols, formats or other information...
-
1134A.5, Item 3
Faucet controls and operation mechanisms shall be operable with one hand and shall not require tight grasping, pinching or twisting of the wrist....
-
11B-802.3.1 Alignment
In row seating, companion seats shall be located to provide shoulder alignment with adjacent wheelchair spaces....