The radius of curvature at the leading edge of the tread shall be 1/2 inch (13 mm) maximum....
Search Results "9-1-1 Service"
Filters
Commonly Searched Documents
-
504.5 Nosings
-
§1630.2(o)(4)
absent undue hardship, to provide a reasonable accommodation to an otherwise qualified individual who meets the definition of disability under the “actual disability” prong (paragraph (g)(1)...
-
403.3 Slope
The running slope of walking surfaces shall not be steeper than 1:20. The cross slope of walking surfaces shall not be steeper than 1:48....
-
Character Height: ADA Standard Section 703.5.5
72 inches (1830 mm) 5/8 inch (16 mm) 40 Inches (1015 mm to less than or equal to 70 inches (1780 mm) 72 inches (1830 mm) and greater 5/8 inch (16 mm), plus 1/...
-
Wheelchair Accessible Gates
The timber kissing gate (figure 1) and the chicane (figure 2) have been modified to meet the Federal requirements....
-
Resources for Air Travelers with Disabilities
Members of the public may call 1-800-778-4838 (voice) or 1-800-455-9880 (TTY) from 7 a.m. to 11 p.m....
-
SETTLEMENT TERMS
SETTLEMENT TERMS Legal Prerequisites & Definitions Title II prohibits discrimination against qualified individuals with disabilities on the basis of disability in the “services...
-
Individuals with Disabilities Education Act (IDEA) and Communication Needs
Special education means specially designed instruction, i.e., adapting, as appropriate to the needs of an eligible child, the content, methodology, or delivery of instruction: (1) to address...
-
Minimum Required Depth: ADA Standard Section 306.3.3
Section 306.3.3 covers the current ADA Standards for the minimum required depth for knee clearance.
-
11B-809.5.1.1 Alarm appliances
Where alarm appliances are provided within a residential dwelling unit as part of the building fire alarm system, they shall comply with Chapter 9, Section 907.5.2.3.3....
-
PDQ XGT Series Cylindrical Lock
Levers to be solid cast, with no plastic inserts, minimum 5-1/2" overall length with supportive spring power totally independent of chassis or latch unit....
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
4.3.7 Slope
An accessible route with a running slope greater than 1:20 is a ramp and shall comply with 4.8. Nowhere shall the cross slope of an accessible route exceed 1:50....
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
4.3.7 SLOPE
An accessible route with a running slope greater than 1:20 is a ramp and shall comply with 4.8. Nowhere shall the cross slope of an accessible route exceed 1:50....
-
Dispersion: ADA Standard Section 233.3.5
Section 233.3.5 covers scoping requirements in the current ADA Standards for dispersion of individual residential dwelling units.
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
Exceptions: 1. ...
-
11B-206.2.5 Restaurants, cafeterias, banquet facilities and bars
Exceptions: 1. ...
-
1134A.2 Number of complying bathrooms
Bathrooms shall be designed to comply with one of the following options: Option 1. All bathrooms within the dwelling unit shall be designed to comply with the following: 1. ...
-
1134A.2 Number of complying bathrooms
Bathrooms shall be designed to comply with one of the following options: Option 1. All bathrooms within the dwelling unit shall be designed to comply with the following: 1....
-
Businesses Inspected by a CASp - from DSA
Government Code Section 4459.7(a)(2)(B), the Division of the State Architect (DSA) publishes the following list of businesses inspected by a Certified Access Specialist (CASp) since January 1,...
-
Accessible Entrance
When a ramp is added to provide an accessible entrance, the slope of the ramp should be as shallow as possible but not more than 1:12....
-
Height Requirements
This exception has been revised to specifically cover operable parts that are "intended for use only by service or maintenance personnel," "electrical or communication receptacles serving...
-
226.1 General
EXCEPTIONS: 1. Sales counters and service counters shall not be required to comply with 902. 2....
