Search Results "Head Height"

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  4.3.5 HEAD ROOM

  Accessible routes shall comply with 4.4.2.

• Federal Documents > Technical Assistance > ADAAG Manual
  Head Room [4.4.2]

  Circulation paths must provide at least 80 inches of vertical clearance. Otherwise, fixed barriers detectable by canes must define areas with less clearance. Gates, rails, curbs, and...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  4.3.5 Head Room

  Accessible routes shall comply with 4.4.2.

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  607.4.2.3 Head End Wall

  607.4.2.3 Head End Wall. A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub.  ...

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  607.4.2.3 Head End Wall

  A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub....

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  607.4.2.3 Head End Wall

  A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub. [ECTCR UFAS 4.34.5.4(3), Fig. 48(a)] ...

• State and Local Documents > Codes and Standards > 2016 California Standards for Accessible Design Pocket Guide - Eff. Jan. 1, 2017
  11B-607.4.2.3 Head end wall

  11B-607.4.2.3 Head end wall. A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub....

• Federal Documents > Standards > 2010 ADA Standards
  Height: ADA Standard Section 902.4.2

  The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (760 mm) maximum above the finish floor or ground.

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-607.4.2.3 Head end wall

  A grab bar 12 inches (305 mm) long minimum shall be installed on the head end wall at the front edge of the bathtub. ...

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  903.5 Height

  903.5 Height. The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-607.4.2.3 Head end wall

  A grab bar 12 inches long minimum shall be installed on the head end wall at the front edge of the bathtub....

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M302.3.3 Head and Back Support

  Where the diagnostic equipment is used in a reclined position, head and back support shall be provided....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-604.9.3 Height

  The height of water closets shall be 11 inches (279 mm) minimum and 17 inches (432 mm) maximum measured to the top of the seat....

• Federal Documents > Standards > 2010 ADA Standards
  Height: ADA Standard Section 1005.2.1

  At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface. EXCEPTION: Where a guard complying with sections...

• Federal Documents > Standards > 2010 ADA Standards
  Character Height: ADA Standard Section 703.5.5

  Minimum character height shall comply with Table 703.5.5....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-804.3.2 Height

  Exception: A counter that is adjustable to provide a kitchen work surface at variable heights, 29 inches (737 mm) minimum and 36 inches (914 mm) maximum, shall be permitted....

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M302.3.3 Head and Back Support

  Where the diagnostic equipment is used in a reclined position, head and back support shall be provided and shall comply with M305.5....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-703.8.9 Height above floor

  Heights of low resolution variable message sign characters shall comply with Table 11B-703.8.4, based on the size of the characters on the sign....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-411.4.11.1 Height

  Floor destination characters shall be 1 inch (25 mm) high minimum complying with Section 11B-703.5.3.

• Federal Documents > Standards > 36 CFR Part 1195 Standards for Accessible Medical Diagnostic Equipment
  M305.5 Head and Back Support

  Where the diagnostic equipment is used in a reclined position, head and back support shall be provided....

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1195 Proposed Accessibility Standards for Medical Diagnostic Equipment NPRM
  M301.3.3 Head and Back Support

  Where the diagnostic equipment is used in a reclined position, head and back support shall be provided....

• State and Local Documents > Codes and Standards > 2022 California Standards
  11B-902.3 Height

  The tops of dining surfaces and work surfaces shall be 28 inches (711 mm) minimum and 34 inches (864 mm) maximum above the finish floor or ground.

• Federal Documents > Preamble to Guidelines > 24 CFR Part 100—Fair Housing Accessibility Guidelines, Preamble
  Minimum Clear Headroom

  The commenters stated that standard doors provide a height range from 75 to 79 inches, and that an 80-inch specification would considerably increase the cost of each door installed....

• Rulemaking Process Documents > NPRMS > 36 CFR Part 1190, Proposed Accessibility Guidelines for Pedestrian Facilities in the Public Right-of-Way: Notice of Proposed Rulemaking (NPRM)
  R409.4 Height

  R409.4 Height. Top of gripping surfaces of handrails shall be 865 mm (2.8 ft) minimum and 965 mm (3.2 ft) maximum vertically above walking surfaces, ramp surfaces, and stair nosings....