Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
Search Results "Input Floor"
Filters
Commonly Searched Documents
-
104.1.1 Construction and Manufacturing Tolerances
-
Additional Design Specifications for Requirement 1
determinations, the final Guidelines for Requirement 1 specify that an accessible entrance on an accessible route is practical when (1) there is an elevator connecting the parking area with any floor...
-
Section 35.151(h) Medical Care Facilities (Section-by-Section Analysis)
to distribute these rooms among each of the specialty areas, would it be appropriate to require the accessible rooms to be dispersed so that there are accessible patient rooms on each floor...
-
213.2 Toilet Rooms and Bathing Rooms
existing toilet or bathing rooms shall not be required where a single unisex toilet room or bathing room complying with 213.2.1 is provided and located in the same area and on the same floor...
-
703.5.5 Character Height
Table 703.5.5 Visual Character Height Height to Finish Floor or Ground From Baseline of Character Horizontal Viewing Distance Minimum...
-
CASI Accessibility Construction Inspection Checklist
During construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not...
-
CALBO Accessibility Construction Inspection Checklist
During construction inspection finish product thicknesses such as flooring materials or wall coverings must be considered when reviewing critical accessibility features, including but not...
-
1 - Design and drawing
Tolerances do not apply where a requirement states a range; for example, that grab bars must be installed between 33 inches and 36 inches above the finished floor....
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
11B-206.2.4 Spaces and elements
benches, clerks' stations, bailiffs' stations, deputy clerks' stations, and court reporters' stations shall not be required to provide vertical access provided that the required clear floor...
-
Elevator requirement to new dining area on the mezzanine of an existing facility
The two keys to the answer are that no elevator would be required in the building in new construction because no floor in the building has more than 3000 square feet of floor area, but no...
-
Power PDF Standard 2 Software
Automatically convert a PDF file to Office documents Microsoft Windows 10, touch-enabled input...
-
Aaron’s Staff Respite Care Ministries
They use their imaginations while playing with building blocks, play dough, stickers, coloring books, and a large selection of sensory input toys....
-
Fur out the wall
Don't cut the concrete or flooring or move plumbing. Just need to make sure all other clearances, (42" from center line to adjacent wall/fixture is clear, etc.) ...
-
California: Toilet Grab Bars - Uneven height allowed?
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
11B-202.4 Path of travel requirements in alterations, additions and structural repairs
Office buildings and passenger vehicle service stations of three stories or more and 3,000 or more square feet (279 m2) per floor. 2. ...
-
11B-202.4 Path of travel requirements in alterations, additions and structural repairs
The types of buildings and facilities are: Office buildings and passenger vehicle service stations of three stories or more and 3,000 or more square feet (279 m2) per floor....
-
American Standard Yorkville 1.6 gpf Right Height Elongated Pressure Assisted Toilet
Floor-mounted, back-outlet toilet combination bowl and tank less seat Pressure-assisted siphon jet action EverClean® Surface Elongated 16-1/2" high bowl for accessible...
-
Symmetry Vertical Platform Lift VPC-SL
platform (when not installed within a runway enclosure) Alarm and emergency stop switch Grab rail Landing interlocks keep door locked when the lift is on another floor...
-
AJW Architectural Products UG2-Railing UG2X-Y108 108" Concealed Snap Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG3-A Series UG3-A12 12" Concealed Snap Flange, 1.5" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG130-A Series UG130-A12 12" Exposed Flange, 1.5" Diameter Grab Bar - Configuration A
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG30-Railing UG30X-Y108 108" Concealed Set Screw Flange, 1.5" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG20-Railing UG20X-Y108 108" Concealed Set Screw Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
