Section 306.3.1 of the ADA Standards covers information in the current ADA Standards for knee clearance.
Search Results "Floor-Level Exit Sign"
Filters
Commonly Searched Documents
-
General: ADA Standard Section 306.3.1
-
11B-813.2.6 Shelf
No fewer than one shelf shall be provided in close proximity to the changing table at 40 inches (1016 mm) minimum and 48 inches (1219 mm) maximum above the finish floor....
-
§ 35.138(g) Ticket prices
Accessible seating must be made available at all price levels for an event. ...
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
11B-809.10.7.3 Reinforcement for grab bars
comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom shall have provisions for installation of floor-mounted...
-
11B-404.2.10 Door and gate surfaces
Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
Executive Order 13548—Increasing Federal Employment of Individuals with Disabilities
13548—Increasing Federal Employment of Individuals with Disabilities ________________________________________________________________ 7/26/2010 On the 20th anniversary of the signing...
-
IV. COMPENSATORY RELIEF FOR COMPLAINANTS AND RELEASE
Within thirty (30) days of receiving each signed release form, the United States will send a copy to Atlantis. ...
-
11B-206.2.3.2 Distance to Elevators
In new construction of buildings where elevators are required by Section 11B-206.2.3, and which exceed 10,000 square feet (929 m2) on any floor, an accessible means of vertical access via...
-
11B-225.2.3 Library book stacks
Book stacks available for public use shall be 54 inches (1372 mm) maximum above the finish floor....
-
Radiologic Equipment
Set stretcher height to be level with table surface for lateral transfer. 2. Adequate floor space to maneuver and position stretcher. 3....
-
Front grab bar protocol
Subjects first performed a level height transfer in each condition and afterwards performed the variable height portion of the protocol as described previously (e.g....
-
Sight Lines
A variety of factors determine the quality of "vertical" sight lines, such as the distance from performance areas, row spacing, staggering of seats, and floor slope....
-
§ 38.175(a)
., not used by freight trains) or guideway, in which stations are constructed in accordance with part 37, subpart C of this title, shall be designed for high-platform, level boarding and...
-
11B-502.6.1 Finish and size
Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
F247.3 Trailheads
Trailhead information signs are addressed in F216.13....
-
Question 3
Are the signs for the parking spaces still readable and mounted so they are not obscured by parked vehicles?...
-
F247.3 Trailheads
Trailhead information signs are addressed in F216.13....
-
11B-502.6.1 Finish and size
Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
11B-502.6.1 Finish and size
Parking identification signs shall be reflectorized with a minimum area of 70 square inches (45,161 mm2)....
-
Additional Clearance: ADA Standard Section 306.2.4
Section 306.2.4 covers the current ADA Standards for additional clearances for toe space.
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-804.2.3 Turning space
In kitchens within multi-bedroom housing units and on floors containing accessible sleeping rooms with adaptable features in undergraduate student housing, turning spaces complying with...