Source: 53 FR 20233, June 2, 1988, unless otherwise noted....
Search Results "Grade 2 Braille"
-
24 CFR Part 8—Nondiscrimination Based on Handicap in Federally Assisted Programs and Activities of the Department of Housing and Urban Development (with amendments issued through Dec. 2007)
-
11B-505.7.2 Non-circular cross sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (102 mm) minimum and 6¼ inches (159 mm) maximum, and a cross-section dimension of 2¼...
-
Public entity
Public entity means -- (1) Any State or local government; (2) Any department, agency, special purpose district, or other instrumentality of a State or States or local government; and...
-
5.3.2.3 Slope
The slope of the turning space and clear floor or ground space surface shall not be steeper than 1:48 (2 percent) in all directions....
-
4.5.4 Gratings
If gratings are located in walking surfaces, then they shall have spaces no greater than 1/2 in (13 mm) wide in one direction (see Fig. 8(g))....
-
3.2.4 Slope
The ground surface in all camp living areas shall have a slope of no more than 1:48 (2 percent) in any direction. Exception....
-
FAQ: How do I delete a Voices post?
Login to Corada and click on VOICES. 2. Locate your post and click the title to open it. 3....
-
5.3.2.3 Slope
The slope of the turning space and clear floor or ground space surface shall not be steeper than 1:48 (2 percent) in all directions....
-
4.5.4 GRATINGS
If gratings are located in walking surfaces, then they shall have spaces no greater than 1/2 in (13 mm) wide in one direction (see Fig. 8(g))....
-
Public entity
Public entity means— (1) Any State or local government; (2) Any department, agency, special purpose district, or other instrumentality of a State or States or local government; and...
-
§ 37.129(b)
(b) Complementary paratransit service for ADA paratransit eligible persons described in §37.123(e)(2) of this part may also be provided by on-call bus service or paratransit feeder service...
-
11B-809.7.2 Changes in level
Ramps complying with Section 11B-405, elevators complying with Section 11B-407 or platform lifts complying with Section 11B-410 shall be provided where changes in level exceed 1/2 inch (...
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
213.1 General
Where toilet facilities and bathing facilities are provided in facilities permitted by 206.2.3 Exceptions 1 and 2 not to connect stories by an accessible route, toilet facilities and bathing...
-
208.2.3.2 Additional Parking Spaces for Residents
Where the total number of parking spaces provided for each residential dwelling unit exceeds one parking space per residential dwelling unit, 2 percent, but no fewer than one space, of all...
-
Undue burden (Preamble, Section-by-Section Analysis)
Several commenters including Sun Microsystems and Adobe Systems favored adopting factors (2) and (3) in the definition of undue burden....
-
Eliason Corporation SCP-8 High Pressure Laminate Traffic Door
They are constructed of 7-ply exterior grade plywood clad on both sides with High Pressure Laminate available in a virtually limitless selection of colors and patterns....
-
D. What Does Title II of the ADA Require with Respect to Curb Ramps at Pedestrian Crossings?
Title II of the ADA requires state and local governments to make pedestrian crossings accessible to people with disabilities by providing curb ramps.2 This requirement applies if your state...
-
Results comparison with current accessibility guidelines
First, it recommends a transfer height between 14 to 24” (35.6 to 61.0cm) and does not specify an allowable gap distance (2)....
-
Accessible Medical Equipment
D.2....
-
Soiltac Powder Topical
The Soiltac Powder Topical is applied to a base of 2 inches of native soil....
-
Soiltac Liquid Topical
The Soiltac Liquid Topical is applied to a base of 2 inches of native soil....
-
Grab bar clearance
ANSI 117.1 allows it in 609.3 (2)....
-
11B-703.8.4 Character height
CHARACTER HORIZONTAL VIEWING DISTANCE MINIMUM CHARACTER HEIGHT 40 inches (1016 mm) to less than or equal to 70 inches (1778 mm) Less than 10 feet (3048 mm) 2...
