You may have walked up the stairs at any given venue and/or building with more than one floor, however you experienced a sudden injury and now faced with impaired mobility to the extent...
Search Results "Floor Destination"
Filters
Commonly Searched Documents
-
EVAC+CHAIR® 600H Stair Evacuation Chair with Lift Handles
-
EVAC+CHAIR® 300H (MK-4) Evacuation Chair
You may have walked up the stairs at any given venue and/or building with more than one floor, however you experienced a sudden injury and now faced with impaired mobility to the extent...
-
Detecto FHD Series Stationary Wheelchair Scale
This scale can only be used for top of floor installations. Please consult factory for pit type installations. 28.5 inch (72 cm) long ramp and 15 ft (4.5 m) indicator cable included....
-
Smith Carrel Hi-Lo Study Carrel - "The Original"
Legs also include 1" leveling glides for a firm level fit to the floor. Ships ready to assemble....
-
Neo-Metro Commercial Contour Urinal 8944 Series
The rim of the urinal is recommended no more than 17" (432 mm) above finished floor. An ADA compliant flush valve must also be used. ...
-
American Standard Right Width 1.28-1.6 gpf FloWise Right Height Elongated Flushometer Toilet
Elongated floor mount flushometer valve toilet, top spud, with seat High Efficiency, Low Consumption operates in the range of 1.28gpf to 1.6gpf (4.8Lpf to 6.0Lpf) Right HeightTM...
-
TownSteel ED1400F Grade 1 Mortise Fire Device
Key standard, Cylinder Dogging and Less Dogging optional Fasteners For 1-3/4" - 2-1/4" thick wood and metal door applications Sex Bolts 6x 10-24UNC Device centerline from finished floor...
-
AJW Architectural Products UG130-Railing UG130X-Y108 108" Exposed Flange, 1.5" Diameter Grab Bar, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
AJW Architectural Products UG3-Railing UG3X-Y108 108" Concealed Snap Flange, 1.5" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Lift-U® LU12 Step/Platform Onboard Lift
When deployed, the lift extends horizontally with the steps forming the platform and lowers to ground level, or raises to bus floor level....
-
Kessel Design Linearis Super60 Trench Drain
Today's bathrooms are barrier-free, with flush-to-floor showers creating a completely new room experience....
-
AJW Architectural Products UG120-Railing UG120X-Y108 108" Exposed Flange, 1.25" Diameter, Peened Grip - Configuration Y
Recommended mounting heights for grab bars are 33" - 36" centerline above finished floor. All mounting of grab bars when possible should have in wall mounting back plates....
-
Panda US-51 All Aluminum ULTRA Folding Door System
Track Options: The standard track is top hung/bottom guided and mounts directly to sub-floor to ensure the smoothest possible operation....
-
104 Conventions
When the requirement states a specified range, such as in section 609.4 where grab bars must be installed between 33 inches and 36 inches above the finished floor, that range provides an...
-
Common Problems with Toilet Rooms
Doors may not swing into the clear floor space required at toilet room fixtures, such as sinks and toilets....
-
Audible Hall Signals
In addition, the provision for audible indicators (407.4.8.2) has been revised to require floor announcement when the car is about to stop, instead of when it has stopped, consistent with...
-
11B-608.6 Shower spray unit and water
[2010 ADAS] EXCEPTION: A fixed shower head located at 48 inches (1220 mm) maximum above the shower finish floor shall be permitted instead of a hand-held spray unit in facilities that...
-
Smooth Surface
this requirement are recognized for sliding doors (Exception 1), certain tempered glass doors without stiles (Exception 2), doors and gates that do not extend to within 10 inches of the floor...
-
11B-216.2 Designations
Examples include interior signs labeling restrooms, room and floor numbers or letters, and room names....
-
F104.1.1 Construction and Manufacturing Tolerances
Where the requirement states a specified range, such as in 609.4 where grab bars must be installed between 33 inches and 36 inches above the floor, the range provides an adequate tolerance...
-
1117B.5.7
Mounting height shall be 60 inches (1524 mm) above the finish floor to the center line of the sign....
-
IV. CONCLUSION
Lewis United States Attorney Veronica Harrell-James Assistant United States Attorney Southern District of Florida 99 Northeast Fourth Street -6th Floor Miami, Florida 33132 (305)...
-
18 Inch Low Height
Thus, the standard could be stated as follows: the transfer surface must lower to at least 17 inches to 19 inches and infinitely adjust to at least 25 inches above the finished floor....
-
4.1.2 Surface Design of Examination Tables and Chairs
This contouring complicates efforts to measure the distance between the floor and the height of the surface onto which patients transfer for their examinations....
