Vandal-Resistant Fasteners Special driver installs fasteners which virtually eliminates unauthorized removal and ensures easy installation. 55” High Doors and Panels 14” clearance from floor...
Search Results "Floor Destination"
- ASI Global Partitions High Density Polyethylene Solid Plastic Toilet Partitions
- Cybex Total Access Leg Extension Exercise Machine
-
(4) Adjustability: Method of Measurement
the height of the transfer surface for both diagnostic equipment used in the supine, prone, or side-lying position and diagnostic equipment used in the seated position, be taken from the floor...
-
11B-805 Medical care and long-term care facilities
Section 11B-306.3.3, Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor...
-
How can existing buildings be retrofitted to make them accessible?
It is not acceptable to require people with disabilities to leave the building to reach another floor....
-
T504 Fare Collection Devices
., operable parts cannot be located higher than 48 inches above the vehicle floor), would require fare collection devices to be mounted higher than the industry norm of 45 inches....
-
220 Automatic Teller Machines and Fare Machines
Gates which must be pushed open by wheelchair or mobility aid users shall have a smooth continuous surface extending from 2 inches above the floor to 27 inches above the floor and shall...
-
Alternative Designs
In addition, the fixture is also taller than most average bathtubs (24" above the finished floor) which permits immersion in the water even when using its fold-down seat....
-
11B-610.3 Shower compartment seats
The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
-
11B-805.7 Built-in cabinets and work surfaces
A 30-inch by 48-inch clear floor space, in compliance with Section 11B-305, shall be centered in front of the display screen....
- Allegion Von Duprin 94/95 Series INPACT Recessed Exit Device
-
II-5.1000 General
Civil suits are routinely heard in a courtroom on the second floor of the courthouse. The courthouse has no elevator or other means of access to the second floor....
-
1. Costs: Summary of Methodology and Results
The other four requirements—signage for accessible seating and doorways, exterior destination or route signs, public address systems, and stop request systems—while applicable to non-rail...
-
Category 3 Eligibility
A wheelchair user can often get around this problem by taking a less direct route to a destination than an ambulatory person would take....
- Elkay Cane Apron LKAPREZL for use with EZ Bi-Level Drinking Fountains
- American Specialties 9018 Recess Mounted Stainless Steel Horizontal Baby Changing Station
- Nana Wall Systems, Inc. Folding Glass Walls SL60
- BraunAbility Millenium 2 Wheelchair Lift for School Buses, Cutaway Buses, and Paratransit Vans
-
F216.2 Designations
Examples include interior signs labeling restrooms, room and floor numbers or letters, and room names....
-
704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (865 mm) minimum above the finish floor....
-
Detectable Warnings
This revision does not substantively change the requirements for the coordination of platforms and vehicle floors. 28 36 CFR part 1192...
-
Companion Seats
Consistent with the ANSI A117.1‒2003 standard, the provision in the final rule specifies that shoulder alignment is to be measured 36 inches from the front of the wheelchair space and that the floor...
-
1007.6.1 Size
Exception: The enforcing agency may reduce the size of each required area of refuge to accommodate one wheelchair space that is not less than 30 inches by 48 inches (762 mm by 1219 mm) on floors...
-
1007.7.4 Separation
The fire-resistance-rated construction shall extend vertically from the ground to a point 10 feet (3048 mm) above the floor level of the area for assisted rescue or to the roof line, whichever...