[2010 ADA Standards] 227.2 Check-Out Aisles. Where check-out aisles are provided, check-out aisles complying with 904.3 shall be provided in accordance with Table 227.2....
Search Results "ADA Standard"
-
11B-227.2 Check-out aisles
-
11B-404.2.9 Door and gate opening force
The force for pushing or pulling open a door or gate shall be as follows: [2010 ADA Standards] 404.2.9 Door and Gate Opening Force....
-
Application to specific scenarios raised in comments. (Section-by-Section Analysis)
Business commenters requested guidance on whether the replacement for a broken or malfunctioning element that is covered by the 1991 Standards would have to comply with the 2010 Standards...
-
3.3.9 Toe Clearance Depth, minimum
3.3.9 Toe Clearance Depth, minimum Toe clearance depths for the standards range from 150 mm (6 in.) in the U.S. to 230 mm (9 in.) in Canada (Figure 3‒9)....
-
Private Building or Facility
A place of public accommodation or a commercial building or facility subject to title III of the ADA and 28 CFR part 36 or a transportation building or facility subject to title III of the...
-
2.1 Q. If a building includes three residential dwelling units and one or more commercial spaces, is the building a covered multifamily dwelling under the Fair Housing Act?
Note, however, that title III of the ADA applies to public accommodations and commercial facilities, therefore an independent determination should be made regarding applicability of the...
-
Over-the-Road Bus
The ADA's definition of "over-the-road bus'' may also be somewhat narrower than the common understanding of the term....
-
M101.1 Purpose
The standards contain technical criteria for medical diagnostic equipment that is accessible to and usable by patients with disabilities....
-
Ambulatory Accessible Toilet Compartments
Section 213.3.1 of the 2010 Standards requires multi-user men’s toilet rooms, where the total of toilet compartments and urinals is six or more, to contain at least one ambulatory accessible...
-
Toilet Stalls [4.17]
Toilet Stalls [4.17] The standard stall in section 4.17 is wheelchair accessible....
-
§40.6 Records.
agency's file on each contract, grant, or loan involving the design, construction, or alteration of a residential structure shall include appropriate documentation indicating: (a) That the standards...
-
§ 35.150(b)(2)(i) Safe harbor
have not been altered in existing facilities on or after March 15, 2012 and that comply with the corresponding technical and scoping specifications for those elements in either the 1991 Standards...
-
Innerface ARQ Interior Sign Frame System
The extruded aluminum frame accepts a variety of insert materials, and if required, an ADA compliant clear non-glare cover protects your graphics and allows for raised characters and Braille...
-
§ 36.105(d)(2)(i)
(i) The principles set forth in the rules of construction in this section are intended to provide for more generous coverage and application of the ADA's prohibition on discrimination through...
-
§ 35.108(d)(2)(i)
(i) The principles set forth in the rules of construction in this section are intended to provide for more generous coverage and application of the ADA's prohibition on discrimination through...
-
11B-407.2.2.4 Differentiation
ETA Editor's Note Lacking certain Exceptions allowed by 2010 ADAS, and imposing additional requirements regarding visible signals, the preceding CBC requirements pertaining to elevator...
-
II-3.1000 General
The ADA similarly extends section 504's nondiscrimination requirement to all activities of State and local governments, not only those that receive Federal financial assistance....
-
E202.7 Best Meets
Where ICT conforming to one or more requirements in the Revised 508 Standards is not commercially available, the agency shall procure the ICT that best meets the Revised 508 Standards consistent...
-
M101.1 Purpose
The proposed standards contain technical criteria for medical diagnostic equipment that is accessible to and usable by patients with disabilities....
-
Multiple Single-User Toilet Rooms
Where multiple single-user toilet rooms are clustered in a single location, fifty percent (50%), rather than the one hundred percent (100%) required by the 1991 Standards, are required to...
-
5.2.2.1 Transfer Surface Width Recommendations for M302
recommends 21 inches for the minimum width of the transfer surface of examination chairs and other equipment primarily used by patients in a seated position as described in its proposed standard...
-
B.3.iv - Who makes the determination that a product meets equivalent facilitation?
The vendor may assert that its product meets or exceeds the level of accessibility required by a particular standard through equivalent facilitation....
-
24.1 Q. What types of grab bars should the reinforcement be designed to accommodate and what types may be used if the builder elects to install grab bars in some units at the time of construction?
In determining what is an appropriate grab bar, builders are encouraged to look to the 1986 ANSI A117.1 standard, the standard cited in the Fair Housing Act....
-
§ 36.304(d)(2)(iii)
., elements for which there are neither technical nor scoping specifications in the 1991 Standards), and therefore those elements must be modified to the extent readily achievable to comply...
