If a public entity previously completed a section 504 transition plan, then, at a minimum, a title II transition plan must cover those barriers to accessibility that were not addressed by...
Search Results "Minimum Dimension"
-
II-8.3000 Transition plan
-
11B-235.2 Boat slips
TABLE 11B-235.2 BOAT SLIPS TOTAL NUMBER OF BOAT SLIPS PROVIDED IN FACILITY MINIMUM NUMBER OF REQUIRED ACCESSIBLE BOAT SLIPS...
-
810.5.3 Platform and Vehicle Floor Coordination
Low-level platforms shall be 8 inches (205 mm) minimum above top of rail....
-
235.2 Boat Slips
Table 235.2 Boat Slips Total Number of Boat Slips Provided in Facility Minimum Number of Required Accessible Boat Slips 1 to 25...
-
11B-404.2.10 Door and gate surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...
-
Door and Gate Surfaces: ADA Standard Section 404.2.10
Section 404.2.10 covers the current ADA Standards for door and gate surfaces on manual doors and gates.
-
11B-404.2.10 Door and gate surfaces
Tempered glass doors without stiles and having a bottom rail or shoe with the top leading edge tapered at 60 degrees minimum from the horizontal shall not be required to meet the 10 inch...
-
11B-809.12 Electrical receptacles, controls and switches
controls and switches shall be located as follows: Where there is no obstruction, 48 inches (1219 mm) maximum measured from the top of the receptacle box and 15 inches (381 mm) minimum...
-
Swinging Doors and Gates: ADA Standard Section 404.2.4.1
Section 404.2.4.1 covers the current ADA Standards for maneuvering clearances at swinging doors and gates.
-
11B-233.3.1.2.6.1 Single building with one common (lobby) entrance
Sites where either Test No. 1 or Test No. 3 is used and it is determined that an accessible route to the common (lobby) entrance is not required, a minimum of 20 percent of the ground floor...
-
11B-809.12 Electrical receptacles, controls and switches
controls and switches shall be located as follows: Where there is no obstruction, 48 inches (1219 mm) maximum measured from the top of the receptacle box and 15 inches (381 mm) minimum...
-
Section 36.406 Standards for New Construction and Alterations (Preamble, Section-by-Section Analysis)
which require the Attorney General to promulgate standards for accessible design for buildings and facilities subject to the Act and this part that are consistent with the supplemental minimum...
-
Caroma® USA Somerton Smart 270 Easy Height Elongated Toilet
Colors: White Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations....
-
Tile Tech Pavers® Detectable-Warning™ Pavers
Whether surface applied or embedded, rigid tiles are rectangular and square units in a limited selection of dimensions....
-
Caroma® USA Invisi Series II Cube Wall Hung Water Closet
Color: White Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations....
-
GE Profile™ Series 30" Slide-In Double Oven Electric Convection Range PS950EFES
Content Weights and Dimensions Approximate Shipping Weight 259 lb Cabinet Width 30 in Cooktop Width 31 1/4 in...
-
Caroma® USA Invisi Series II Walvit Wall Hung Elongated Water Closet
provided with the kit Seat: The following Caroma seats are recommended: Elongated Code No. 326307, Elongated Easy Closing Code No. 326221, and Commercial Code No. 326813 Color: White Dimensions...
-
Caroma® USA Sydney Smart Point 8 Toilet
Dimensions: All dimensions are in inches and millimetres and are subject to normal manufacturing variations....
-
Legislation
Title V of the ADA mandated that the Architectural and Transportation Barriers Compliance Board (Access Board) set up minimum guidelines "to ensure that buildings, facilities, rail passenger...
-
603.3 Mirrors
In order for mirrors to be usable by people who are ambulatory and people who use wheelchairs, the top edge of mirrors should be 74 inches (1880 mm) minimum from the floor or ground....
-
Entry Doors
Entry Doors Under the ADA Standards for Accessible Design, an accessible doorway must have a minimum clear opening width of 32 inches when the door is opened to 90 degrees....
-
11B-904.4 Sales and service counters
the number of existing counters at work stations or a reduction of the number of existing mail boxes, the counter shall be permitted to have a portion which is 24 inches (610 mm) long minimum...
-
11B-224.4 Guest rooms with communication features
TABLE 11B-224.4 GUEST ROOMS WITH COMMUNICATION FEATURES TOTAL NUMBER OF GUEST ROOMS PROVIDED MINIMUM NUMBER OF REQUIRED GUEST ROOMS WITH COMMUNICATION...
-
1007.8 Exterior area for assisted rescue
rescue and the interior of the building, the building exterior walls within 10 feet (3048 mm) horizontally of a nonrated wall or unprotected opening shall be constructed as required for a minimum...
