A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
Search Results "Patient in Side-Lying Position"
Commonly Searched Documents
-
11B-1010.1 Turning space
-
Sides of Curb Ramps
Section 406.3 addresses the sides of curb ramps and specifies that side flares, where provided, have a slope of 1:10 maximum....
-
5.4.3.1 Positioning Support Height Recommendation for Imaging Equipment with Transfer Surfaces
5.4.3.1 Positioning Support Height Recommendation for Imaging Equipment with Transfer Surfaces For imaging equipment with transfer surfaces, the Committee recommends a positioning support...
- Hoyer Heavy-Duty Power Lift with Optional Scale
-
M303 Diagnostic Equipment Used by Patients Seated in Wheelchair
M303 provides technical criteria for diagnostic equipment used by patients seated in a wheelchair....
-
11B-604.5.1 Side wall
11B-604.5.1 Side wall....
- Integralift Fixed Ceiling Lift
-
11B-805.5 Patient Change Areas
Areas where patients change or are prepared for a procedure shall comply with Section 11B-222....
-
11B-805.5 Patient change areas
Areas where patients change or are prepared for a procedure shall comply with Section 11B-222....
-
11B-805.5 Patient change areas
Areas where patients change or are prepared for a procedure shall comply with Section 11B-222....
-
407.8.1.1 Vertical Plane for Side Reach
Where a side reach is provided, the vertical reference plane shall be 48 inches (1220 mm) long minimum....
-
407.12.1.1 Vertical Plane for Side Reach
Where a side reach is provided, the vertical reference plane shall be 48 inches (1220 mm) long minimum....
- Hoyer Manual Hydraulic Lift
- Hoyer Presence Heavy-Duty Lift
-
3. Lift Compatibility Exception
The MDE NPRM proposed that diagnostic equipment used by patients in the supine, prone or side-lying position and diagnostic equipment used by patients in the seated position be usable with...
-
11B-604.5.1 Side wall
the front end positioned 24 inches (610 mm) minimum in front of the water closet...
-
Figure M2: M301.4 Lift Compatibility
(at Diagnostic Equipment for Use by a Patient in a Supine, Prone, or Side-Lying Position)...
- Hill-Rom Liko® M220 / M230 Mobile Lift
-
M305.3.2 Height (Section-by-Section Analysis)
For horizontal supports, the MDE NPRM proposed a gripping surface height of 34 inches minimum and 38 inches maximum above the standing surface. There were no public comments on this...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Scooter
Horizontal distances in the positive range represent offset distance away from the body (or barrier depth) in relation to the lateral-most point, and the negative range implying that the...
-
Hill-Rom Sabina® II Mobile Lift
Requires the Premium User plan or above. (Login or upgrade your account!)
-
243 Shooting Facilities with Firing Positions
243 Shooting Facilities with Firing Positions Sections 243 and 1010 of the 2010 Standards require an accessible turning space for each different type of firing position at a shooting...
-
M302.2.2 Sunset Provision (Section-by-Section Analysis)
As discussed in Section IV.B.1.a. (Significant Changes – Transfer Surface Adjustability), this is a new provision added to the final rule in conjunction with the new requirement of a...
- Hoyer Journey Stand-Up Lift