BACKGROUND: A project at an existing site is an alteration of that facility and subject to the requirements of CBC Section 11B-202.4 Path of travel requirements in alterations, additions...
Search Results "Horizontal Projection"
-
BACKGROUND
-
Landscape Forms Inc. Presidio Bench Collection
frames Backed or backless Backed seats on curved runs may face inside or outside the circle Optional tubular steel arms welded to seats: one or two per seat Seats bolt securely to horizontal...
-
11B-505.10.3 Bottom extension at stairs
At the bottom of a stair flight, handrails shall extend at the slope of the stair flight for a horizontal distance equal to one tread depth beyond the last riser nosing....
-
First Occupancy
"First occupancy" is determined on a building-by-building basis, not on a project-by-project basis....
-
Bobrick Swing-Up Grab Bar B-4998.99
Swing-up grab bar shall be manually raised for approach or departure and lowered to horizontal position for support; counterweighted design shall prevent grab bar from falling back down...
-
Back Support: ADA Standard Section 903.4
Back support shall be 2½ inches (64 mm) maximum from the rear edge of the seat measured horizontally. Advisory 903.4 Back Support....
-
1009.2.1 Elevators required
buildings equipped throughout with an automatic sprinkler system installed in accordance with Section 903.3.1 or 903.3.1.2, the elevator shall not be required on floors provided with a horizontal...
-
1013.4 Raised character and braille exit signs
Where exit signs are provided at an area of refuge with direct access to a stairway, an exterior area for assisted rescue, an exit stairway or ramp, an exit passageway, a horizontal exit...
-
407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
-
§8.27(a)(1)
(1) First, to a current occupant of another unit of the same project, or comparable projects under common control, having handicaps requiring the accessibility features of the vacant unit...
-
609.4 Position of Grab Bars
Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
609.4 Position of Grab Bars
Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
Clearance: ADA Standard Section 804.2
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware....
-
Beach Nourishment [F248.1.2]
Beach access routes are required when the entity that administers or manages the beach undertakes a beach nourishment project....
-
3. FIELD VERIFICATION
FIELD VERIFICATION: DSA may review the code compliance of the path of travel during the course of a project. 3.1 Plan Review: DSA may verify compliance of path of travel elements presented...
-
Inpro Corporation JointMaster® 925 Fire Barrier System Expansion Joint Systems
Compressed and friction-held in gap for easy installation Primer-less silicone sealant available in 28.7oz [849 ml] cartridges or 2.63 US gallon [108 L] pails - Self leveling (horizontal...
-
Kohler Dynametric® 60" x 32" Alcove Bath
Dynametric® Combining KOHLER styling and functionality, the Dynametric 5' bath includes an integral apron for easy installation and a raised bath bottom that allows use of a horizontal...
-
Meeting Purpose
Share the projected numbers of attendees with disabilities. Emphasize that these projections are typically low given that many people don’t request any accommodation....
-
68.102(b) Estimated cost of construction
(b) For purposes of registration, the estimated cost of construction for the project shall be based on the pedestrian elements only....
-
§8.23(a) Substantial alteration
If alterations are undertaken to a project (including a public housing project as required by §8.25(a)(2)) that has 15 or more units and the cost of the alterations is 75 percent or more...
-
11B-609.4 Position of grab bars
Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
609.4 Position of Grab Bars
Grab bars shall be installed in a horizontal position, 33 inches (840 mm) minimum and 36 inches (915 mm) maximum above the finish floor measured to the top of the gripping surface, except...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Power Chair
expected to reach to a target location in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical axis) and (b) offset distance (shown on the horizontal...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Side Approach Manual Wheelchair
expected to reach to a target location in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical axis) and (b) offset distance (shown on the horizontal...
