Signs shall be permanently posted either immediately adjacent to the parking space or within the projected parking space width at the head end of the parking space....
Search Results "Horizontal Projection"
-
11B-502.6.3 Location
-
Sargent 7800 Mortise Lock with Push/Pull Trim Hardware
Push/Pull trim can be mounted with the paddle oriented in vertical, down or horizontal position. Down or horizontal paddle orientation is required for cylinder applications....
-
11B-505.10.3 Bottom extension at stairs
At the bottom of a stair flight, handrails shall extend at the slope of the stair flight for a horizontal distance equal to one tread depth beyond the last riser nosing....
-
1134A.8, Item 1
Vanities and lavatories shall be installed with the centerline of the fixture a minimum of 18 inches (457 mm) horizontally from an adjoining wall or fixture to allow for forward approach...
-
1134A.8, Item 1
Vanities and lavatories shall be installed with the centerline of the fixture a minimum of 18 inches (457 mm) horizontally from an adjoining wall or fixture to allow for forward approach...
-
11B-703.5.10 Format
Text shall be in a horizontal format....
-
11B-703.2.9 Format
Text shall be in a horizontal format....
-
11B-406.5.1 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
11B-406.5.1 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
11B-404.2.4.3 Recessed doors and gates
approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior doorway, projects...
-
11B-404.2.4.3 Recessed doors and gates
approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the latch side of an exterior doorway, projects...
-
Egress, Means of
A means of egress comprises vertical and horizontal travel and may include intervening room spaces, doorways, hallways, corridors, passageways, balconies, ramps, stairs, enclosures, lobbies...
-
11B-903.6 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
HANDRAIL
A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
Slope Ratio
Slope Ratio—A ratio of vertical distance to horizontal distance or rise to run....
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
On imaging equipment with transfer surfaces, the transfer or positioning support must be oriented horizontally....
-
11B-505.10.3 Bottom extension at stairs
At the bottom of a stair flight, handrails shall extend at the slope of the stair flight for a horizontal distance equal to one tread depth beyond the last riser nosing. ...
-
68.10(23) Registered Building or Facility
(23) Registered Building or Facility--For the purposes of § 469.101 of the Act, a registered building or facility is a construction project that has been assigned a project registration...
-
1009.4.2 Area of refuge
Areas of refuge are not required for elevators accessed from a refuge area in conjunction with a horizontal exit....
-
Edge Protection: ADA Standard Section 405.9
Section 405.9 covers the current ADA Standards for edge protection at ramps.
-
§8.22(a)
(a) New multifamily housing projects (including public housing and Indian housing projects as required by §8.25) shall be designed and constructed to be readily accessible to and usable...
-
11B-407.3.1 Type
Elevator doors shall be the horizontal sliding type. Car gates shall be prohibited....
