306.2 Toe Clearance....
Search Results "Handrail Clearance"
Filters
Commonly Searched Documents
-
306.2 Toe Clearance
-
R405.3 Knee Clearance
R405.3 Knee Clearance...
-
R405.2 Toe Clearance
R405.2 Toe Clearance...
-
306.3 Knee Clearance
306.3 Knee Clearance....
-
306.2 Toe Clearance
306.2 Toe Clearance....
-
Swinging Doors and Gates: ADA Standard Section 404.2.4.1
Section 404.2.4.1 covers the current ADA Standards for maneuvering clearances at swinging doors and gates.
-
306.2 Toe Clearance
Figure 306.2 Toe Clearance...
-
306.3 Knee Clearance
Figure 306.3 Knee Clearance...
-
11B-1005.2 Railings
Where provided, railings, guards, or handrails shall comply with Section 11B-1005.2....
-
Figure 306.2 Toe Clearance – Drawing from the U.S. Access Board
-
Figure 306.3 Knee Clearance – Drawing from the U.S. Access Board
-
Can handrails overlap ramp landings?
Along runs and landings, the minimum clear width must be measured between the leading edge of handrails....
-
R409.9 Fittings
Handrails shall not rotate within their fittings. Where expansion joints are necessary for large spans of handrails, the expansion joint is permitted to rotate in its fitting....
-
Knee Clearance: Clearance as Measured from Distal Knee Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., lavatories, drinking fountains)....
-
R409.3 Continuity
Handrails shall be continuous within the full length of each ramp run or stair flight....
-
Eliminating Hazards [4.26.4]
Eliminating Hazards [4.26.4] Handrails, grab bars, and adjacent surfaces cannot have any sharp or abrasive elements....
-
Knee Clearance: Clearance as Measured from Anterior-Most Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., light switches)....
-
Knee Clearance: Clearance as Measured from Dorsal Foot Point - Manual Wheelchair
This depicts knee and toe clearance required by manual chair users for forward approach to elements in the built environment (e.g., countertops)....
-
R409.4 Height
Top of gripping surfaces of handrails shall be 865 mm (2.8 ft) minimum and 965 mm (3.2 ft) maximum vertically above walking surfaces, ramp surfaces, and stair nosings....
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
T206 Handrails, Stanchions, and Handholds
The 2016 Non-Rail Vehicle Guidelines, as with the existing guidelines, require handrails, stanchions, or handholds to be provided at passenger doorways, fare collection devices (where such...
-
306.3.4 Clearance Reduction
Between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
