Keypads shall be identified by characters complying with 703.5 and shall be centered on the corresponding keypad button. The number five key shall have a single raised dot....
Search Results "Character Spacing (VMS)"
Commonly Searched Documents
-
407.4.7.2 Keypads
-
11B-705.1.1.2 Dome spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 2.3 inches (58 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Size: ADA Standard Section 305.3
Section 305.3 covers the current ADA Standards for the required size of compliant clear floor or ground space.
-
11B-305.3 Size
The clear floor or ground space shall be 30 inches (762 mm) minimum by 48 inches (1219 mm) minimum....
-
11B-1008.3.1.3 Transfer space
A transfer space complying with Sections 11B-305.2 and 11B-305.3 shall be provided adjacent to the transfer platform....
-
11B-605.3 Clear floor space
A clear floor or ground space complying with Section 11B-305 positioned for forward approach shall be provided....
-
Circular Space: ADA Standard Section 304.3.1
Section 304.3.1 covers the current ADA Standards for circular turning space.
-
Clear Deck Space: ADA Standard Section 1009.4.1
A clear deck space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer wall....
-
11B-1008.4.1 Turning space
At least one turning space complying with Section 11B-304 shall be provided on the same level as play components....
-
R404.7 Maneuvering Space
R404.7 Maneuvering Space. Where a clear space is confined on all or part of three sides, additional maneuvering space shall be provided in accordance with R404.7.1 and R404.7.2....
-
11B-407.4.7.2 Keypads
Keypads shall be identified by characters complying with Section 11B-703.5 and shall be centered on the corresponding keypad button. The number five key shall have a single raised dot....
-
11B-216.2 Designations
Interior and exterior signs identifying permanent rooms and spaces shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters|_, 11B-703.3 _|Braille|_,...
-
Clear Floor or Ground Space: ADA Standard Section 1002.6.1
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the transfer device....
-
SPACE
SPACE. A definable area, such as a room, toilet room, hall, assembly area, entrance, storage room, alcove, courtyard, or lobby....
-
Space
Space. A definable area, such as a room, toilet room, hall, assembly area, entrance, storage room, alcove, courtyard, or lobby....
-
Passing Spaces on Trails
Passing spaces must be at least 60 inches (1,525 millimeters) wide (including the trail width) by 60 inches (1,525 millimeters) long (figure 134)....
-
Installation Height and Location: ADA Standard Section 703.4
Signs with tactile characters shall comply with 703.4....
-
A4.30.4 Raised and Brailled Characters and Pictorial Symbol Signs (Pictograms)
A4.30.4 Raised and Brailled Characters and Pictorial Symbol Signs (Pictograms)....
-
11B-411.1.2 Car designations
Elevator cars shall be designated with a single alphabetic character....
-
11B-411.1.2 Car designations
Elevator cars shall be designated with a single alphabetic character....
-
11B-703.4 Installation height and location
Signs with tactile characters shall comply with Section 11B-703.4....
-
Approach: ADA Standard Section 305.6
Section 305.6 covers the current ADA Standards for the approach to clear floor space.
-
11B-703.5.5 Character height
11B-703.5.5 Character height. Minimum character height shall comply with Table 11B-703.5.5....
- Access Board: Tactile Sign Braille Requirements