provide options to transfer onto the short side and the long side of the surface....
Search Results "Door Surface"
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
-
5.4.2 Transfer Support Length for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
The transfer support should be a minimum length of 15 inches positioned so that the transfer support overlaps the minimum depth of the transfer surface by 80%....
-
Sloped Surfaces
Measuring the slope of a ramp, parking space, pedestrian route, or other ground or floor surface is important to identify whether the surface is accessible....
-
Door and Signal Timing
Section 407.3.4 specifies door and signal timing....
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
4.2 Physical Accessibility Barriers and Solutions
of the existing counter Facility has two floors but no elevator Ask staff to move equipment that you use to the ground level Install an elevator Interior doors...
-
Designing Sidewalks and Trails for Access, Part II of II: Best Practices Design Guide
Source: U.S. Department of Transportation / Beneficial Designs, Inc. Document: 484 pages (9.30 MB PDF) Publication Date: September 2001 This guidebook is the second part of...
-
Handrails [§504.6, §505]
Handrails [§504.6, §505] Handrails are required on both sides of stairs and must be continuous within the full length of each stair flight. Inside handrails on switchback or...
-
Cal-Royal Products Swing Clear Hinges
Swings door completely clear of opening when door is opened 95 degrees....
-
5.4.3 Transfer Support Height for M301 and M302
5.4.3 Transfer Support Height for M301 and M302 Description: Transfer support height applies to the vertical distance that the gripping area of the support is above the transfer surface...
-
1010.1 Doors
…
-
1010.1 Doors
…
-
Corbin Russwin Inc. HPSK Push Pull Paddle Trim
withstand abusive environments • Flexible: multiple mounting orientations accommodate customized openings • Easy Open: paddle shape and location creates a quick reference point for door...
-
1008.1.9 Door operations
1008.1.9 Door operations. ......
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge 1260
Five Knuckle - Full Mortise Swing Clear Hinge 1260 - Plain Bearing - Standard Weight Description:Â - ANSI A8123 - For square edge doors - Non-rising removable pin with...
-
Yale 6000 Series Commercial Exit Devices
With its robust, modern design and smooth, quiet operation, the Yale 6000 Series exit device provides an attractive solution that can withstand the rigors of multi-family, retail,...
-
Corbin Russwin Inc. FE6700 Storm Shutter Multi-Point Latching System
The Corbin Russwin FE6700 is a robust three-point locking system engineered to help save lives by securing the community shelter window openings. Extra-heavy duty steel components...
-
Yale 1800 Series Flatbar Exit Device
An economical, light/medium duty Grade 2 lever lockset which provides an outstanding combination of value and performance. It’s the ideal lever lockset for light commercial and...
-
Corbin Russwin Inc. ED8000 Pushpad Exit Device
Heavy-duty steel construction and Grade 1 performance, priced for outstanding value. Meets rigorous life safety and security requirements, while offering pleasing aesthetics and...
