Attachment I: Program Access in Existing Facilities
Search Results "Clear Floor Space"
-
Attachment I: Program Access in Existing Facilities
-
M303.3.3.1 Running Slope
Ramp runs shall have a running slope not steeper than 1:12. EXCEPTION: A running slope not steeper than 1:8 shall be permitted for ramp runs with a maximum height of 2 ½ inches...
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side with a drop off.
-
M303.3.3.5 Handrails
Ramps with a rise greater than 6 inches (150 mm) shall provide handrails on both sides.
-
Battery-powered Wheelchairs
Battery-powered Wheelchairs You must accept a passenger’s battery-powered wheelchair, including the battery, as checked baggage unless baggage compartment size and aircraft...
-
§ 36.302(f)(5) Hold and release of tickets for accessible seating
(5) Hold and release of tickets for accessible seating.
-
4.1.3(18)
(18) If fixed or built-in seating or tables (including, but not limited to, study carrels and student laboratory stations), are provided in accessible public or common use areas, at...
-
3.1.4.2 Width of RV Campsite and Dump Station Vehicle Parking Areas
Where RV camping units or dump stations are provided, vehicle parking areas for recreational vehicles and trailers that are required to be accessible in accordance with table 3.1.1...
-
M303.3.3.5 Handrails
Ramps with a rise greater than 6 inches (150 mm) shall provide handrails on each side.
-
M303.3.3.1 Running Slope
Ramp runs shall have a running slope not steeper than 1:12.
-
11B-228.3 Electric vehicle charging stations
[See subsections ...]
-
11B-228.3 Electric vehicle charging stations
[See subsections ...]
-
Section 36.406(f) Assembly Areas (Section-by-Section Analysis)
Both designs have the potential to reduce the number of available wheelchair seating spaces below the level required. ...
-
Surface [1017.2]
The surfaces of trails, passing spaces, and resting intervals must be firm and stable. A firm trail surface resists deformation by indentations....
-
11B-703.4.1 Height above finish floor or ground
mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised characters...
-
11B-703.4.1 Height above finish floor or ground
mm) maximum above the finish floor or ground surface, measured from the baseline of the highest line of raised characters...
-
4.8.3 Clear Width
The minimum clear width of a ramp shall be 36 in (915 mm)....
-
4.8.3 CLEAR WIDTH
The minimum clear width of a ramp shall be 36 in (915 mm)....
-
Access Board: Tactile Sign Braille Requirements
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
11B-308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
-
11B-308.3.1 Unobstructed
Where a clear floor or ground space allows a parallel approach to an element and the side reach is unobstructed, the high side reach shall be 48 inches (1219 mm) maximum and the low side...
-
Feature 5 - Meeting Space
Feature 5 - Meeting Space The meeting space must have an accessible floor plan. ...
-
UFAS vs. ADAAG Comparison
by ADAAG's 20% disproportionate limit, but must be provided unless "Structurally Impracticable." 4.1.5(4) Must give consideration to making elements, spaces...
-
General: ADA Standard Section 208.3.1
Section 208.3.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for parking space locations.
