Transfer platforms shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
Search Results "Kitchen Work Surface"
Commonly Searched Documents
-
11B-1008.3.1.1 Size
-
11B-1008.3.1.1 Size
Transfer platforms shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-1008.3.2.1 Size
Transfer steps shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
- Freedom Scientific Focus 14 Blue Ultra-Portable Braille Interface Device
-
1118B.4
Surfaces for wheelchair spaces. Clear floor or ground spaces for wheelchairs shall comply with Section 1124B Ground and Floor Surfaces....
-
Preliminary Guidelines for SEWF Installation
Do not saturate surface with these lubricants. After compaction the thickness will be approximately 40 mm (1.6 in.). 3....
-
Issue 15: Installation Errors Increase Risk
When you press the button, the light comes on to let you know that it’s working. When the WALK signal begins, you hear a fast ticking sound”....
-
Paragraph (h) Non-interference with hearing technologies (Section-by-Section Analysis)
They urged the Board to defer any such requirement until the ANSI C63 Committee had finished its work....
-
Section 1630.14(b) Employment Entrance Examination
Section 1630.14(b) Employment Entrance Examination An employer is permitted to require post-offer medical examinations before the employee actually starts working....
-
Emergency Evacuation Preparedness: Take Responsibility for Your Safety
Ray, who has quadriplegia and works on the second floor, said it was the first fire drill in the 18 months he's worked there....
-
Maintenance and Back-Up
The ADA regulation contains a specific provision requiring that covered entities maintain their accessibility features and equipment in operable working condition....
-
Applicability
approval of the appropriate GSA Assistant Regional Administrator, Public Buildings Service, where such specific authorization may facilitate improvements in the efficiency in performing work...
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
Check Height and Location of the Pushbutton
Check Height and Location of the Pushbutton Confirm that pushbutton height and location conform to specifications and can be reached by a person in a wheelchair, from a hard surfaced level...
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground....
-
Parking Spaces for Vehicles Other Than RVs [F244.2.3.2.2]
Parking spaces for vehicles other than RVs within camping units with mobility features must comply with the following technical requirements for width, surface, and slope....
-
R305.2.2 Parallel Curb Ramps
On parallel curb ramps, detectable warning surfaces shall be placed on the turning space at the flush transition between the street and sidewalk....
-
903.5 Height
The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the finish floor or ground. ...
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
-
11B-813.2.1.1 Size
Adult changing tables shall have a changing surface of 70 inches (1778 mm) minimum length and 30 inches (762 mm) minimum width....
-
11B-903.5 Height
The top of the bench seat surface shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the finish floor or ground....
- Seton Standard Braille Signs - Exit 31935
-
Passing Spaces [1016.4]
Also, consider providing a minimum clear width of 60 inches if the ORAR is a boardwalk or otherwise not at the same level as the adjoining ground surface or if the edge is bordered by timbers...