Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Mitered corners are ground and polished smooth Multiple reflective surfaces available Unit is equipped...
Search Results "Extended Floor Surface"
Filters
Commonly Searched Documents
-
AJW Architectural Products U705 Series 16"W x 30"H Angle Frame Mirror w/ Mounted Shelf - Plate Glass Surface
-
11B-303.5 Warning curbs
Abrupt changes in level exceeding 4 inches (102 mm) in a vertical dimension between walks, sidewalks or other pedestrian ways and adjacent surfaces or features shall be identified by warning...
-
11B-217.2 Wheelchair accessible telephones
TABLE 11B-217.2Â WHEELCHAIR ACCESSIBLE TELEPHONES NUMBER OF TELEPHONES PROVIDED ON A FLOOR, LEVEL, OR EXTERIOR SITE MINIMUM NUMBER OF REQUIRED WHEELCHAIR...
-
11B-604.5.2 Rear wall
The rear wall grab bar shall be 36 inches (914 mm) long minimum and extend from the centerline of the water closet 12 inches (305 mm) minimum on one side and 24 inches (610 mm) minimum on...
-
606.3 Height
Lavatories and sinks shall be installed with the front of the higher of the rim or counter surface 34 inches (865 mm) maximum above the finish floor or ground. EXCEPTIONS: 1....
-
503.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
503.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
502.3.2 Length
Access aisles shall extend the full length of the parking spaces they serve....
-
11B-503.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
306.2.2 Maximum Depth
Toe clearance shall extend 25 inches (635 mm) maximum under an element....
-
11B-503.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
11B-503.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
Private Buildings: ADA Standard Section 217.4.2.2
Section 217.4.2.2 covers scoping requirements in the current ADA Standards for TTYs in private buildings.
-
11B-217.4.2.2 Private buildings
Where four or more public pay telephones are provided on a floor of a private building, at least one public TTY shall be provided on that floor....
-
11B-217.4.2.1 Public buildings
Where at least one public pay telephone is provided on a floor of a public building, at least one public TTY shall be provided on that floor....
-
Trash, Recycling, and Other Essential Containers
Ensure the surface is firm and stable and made from a material consistent with the setting and level of development....
-
Requirement 5. Light switches, electrical outlets, thermostats and other environmental controls in accessible locations.
thermostats and other environmental controls would meet section 100.205(c)(3)(ii) if operable parts of the controls are located no higher than 48 inches, and no lower than 15 inches, above the floor...
-
11B-1009.3.2 Submerged depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (762 mm) maximum below the stationary water level....
-
1009.3.2 Submerged Depth
Sloped entries shall extend to a depth of 24 inches (610 mm) minimum and 30 inches (760 mm) maximum below the stationary water level....
-
11B-705.2 Detectable directional texture
transit boarding platforms shall comply with Figure 11B-705.2 and shall be 0.1 inch (2.5 mm) in height that tapers off to 0.04 inch (1.0 mm), with bars raised 0.2 inch (5.1 mm) from the surface...
-
11B-404.2.9 Door and gate opening force
or ground surface and the centerline of the second push plate shall be 30 inches (762 mm) minimum and 44 inches (1118 mm) maximum above the floor or ground surface....