inches (1219 mm) measured from the top of the receptacle outlet box nor less than 15 inches (381 mm) measured from the bottom of the receptacle outlet box to the level of the finished floor...
Search Results "Extended Floor Surface"
-
1136A.1 Receptacle heights
-
1136A.1 Receptacle heights
Physical barriers and obstructions shall not extend more than 25 inches (635 mm) from the wall beneath the receptacle....
-
11B-809.10.7.3 Reinforcement for grab bars
Where reinforcement is installed at the back, it shall be installed between 30 inches (762 mm) maximum and 38 inches (965 mm) minimum above the finish floor....
-
101.4.1 Gas
These requirements apply to gas piping systems extending from the point of delivery to the inlet connections of appliances and the installation and operation of residential and commercial...
-
Table of Contents
and Work Surfaces 227 Sales and Service 228 Depositories, Vending Machines, Change Machines, Mail Boxes, and Fuel Dispensers 229 Windows 230 Two-Way Communication Systems...
-
5.8.1.1 Clear Platform Size Recommendation
The foot pedals, footrests, scooter deck and tip wheels can overhang or extend beyond the platform and still get an accurate weight.II The Wheeled Mobility Anthropometry Project research...
-
11B-308.3.1 Unobstructed
reach shall be 15 inches (381 mm) minimum above the finish floor or ground. ...
-
4.4.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
Activar JL Industries 1900 Series Dual AED & Emergency Oxygen Recessed or Surface-Mounted Cabinet
Surface-mount has a square edge. Alarm: 85 db Commander (audible) alarm standard (battery operated). Tub: White powder-coated CRS. ...
-
AJW Architectural Products U804 Dual Hooded Toilet Tissue Dispenser - Surface Mounted - Non-Controlled
stainless steel with a #4 satin finish Holds two standard toilet tissue rolls Product Specs Hood: Fabricated of #18 gauge stainless steel with a #4 satin finish on all exposed surfaces...
-
AJW Architectural Products U803 Single Hooded Toilet Tissue Dispenser - Surface Mounted - Non-Controlled
stainless steel with a #4 satin finish Holds one standard toilet tissue roll Product Specs Hood: Fabricated of #18 gauge stainless steel with a #4 satin finish on all exposed surfaces...
-
Executive summary
The majority of users (92%) could transfer to a surface at a height similar to the median WMD seat to floor height of the sample (22 in). ...
-
11B.707.7.1.3 Horizontally mounted display screen
from the viewer 60 degrees to 90 degrees (horizontal) from vertical, the center line of the display screen and other display devices shall be no more than 34 inches (864 mm) above the floor...
-
11B-812.7 Access aisle
Access aisles shall be 60 inches (1524 mm) wide minimum and shall extend the full required length of the vehicle spaces they serve....
-
11B-812.7 Access aisle
Access aisles shall be 60 inches (1524 mm) wide minimum and shall extend the full required length of the vehicle spaces they serve....
-
Gratings [4.5.4]
These requirements apply to gratings located in any walking surface, including courtyards and plazas, not just those on accessible routes....
-
Gamco Surface-Mounted Hand Dryer - DR-510
Description: This small, low profile, ADA compliant hand dryer is multi-voltage running on 110 up to 240 Volt AC electrical supply. Operation is automatically controlled on/off,...
-
Bobrick Surface-Mounted Medicine Cabinet B-297
All-steel cabinet and two fixed shelves with baked white enamel finish. Mirror: No. 1 quality, 1⁄8" (3mm) glass electrolytically copper-plated. Door has enameled steel piano-hinge...
-
Gamco Surface-Mounted Towel Pin Satin - 76777
Description (Formerly model B-5167) Satin-finish. All components welded construction with concealed screw attached on 20-gauge (0.9mm) stainless steel wall plate.
-
Bobrick Surface-Mounted Towel Pin B-677
Bright-polished stainless steel. Flange is 2" x 2" (50 x 50mm). Projects 3 3⁄8" (85mm) from wall.
-
Norton Surface Mounted 2800ST Cam Action Closer
The cam action design is ideal as it provides greater efficiency than a rack and pinion door closer for slide track applications. Cam action closers provide a lower opening...
-
Allegion LCN 1000 Surface Mounted Door Control
Applications For aluminum, hollow metal, or wood swinging doors and frames Can be used with hinge or pivot mounted door Mounts on a 1 3/4' transom without...
-
§ 36.406(e)(1)
(1) Kitchens within housing units containing accessible sleeping rooms with mobility features (including suites and clustered sleeping rooms) or on floors containing accessible sleeping...
