The centerline of the accessible water closet shall be 16 inches (405 mm) minimum and 18 inches (457 mm) maximum from the side wall or partition....
Search Results "Maximum Extent Practicable"
Filters
Commonly Searched Documents
-
1115B.4.1, Item 1
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
The gripping surface of the transfer support should be located 1 ½ inches maximum measured horizontally from the adjacent edge of the transfer surface....
-
M301.4 Lift Compatibility
Equipment components are permitted to be located within 8 inches (205 mm) maximum of the centerline of the clearance width....
-
Element-by-Element Safe Harbor for Existing Facilities
For example: The 1991 Standards allowed light switches, thermostats, and other controls to be installed at a maximum height of 54 inches....
-
Trailhead Signs
minimum the following information: Trail name Length of the trail Type of surface on the trail Typical and minimum trail tread width Typical and maximum...
-
Required Means of Egress [IBC §1007.1 (2003), §1003.2.13 (2000)]
For example, a business occupancy with no more than 30 occupants and a maximum exit access travel distance of 75 feet is permitted to have a single means of egress....
-
American National Standard/AAMI HE75:2009/(R)2013 Human factors engineering – Design of medical devices
It is most important that the objectives and potential uses of an AAMI product standard or recommended practice are clearly understood....
-
703.3.1 Dimensions and Capitalization
Table 703.3.1 Braille Dimensions MEASUREMENT RANGE MINIMUM IN INCHES MAXIMUM IN INCHES Dot base diameter 0.059...
-
11B-1009.3.3 Handrails
The clear width between required handrails shall be 33 inches (838 mm) minimum and 38 inches (965 mm) maximum. Exceptions: 1. ...
-
Chapter 3: Building Blocks
Substantive revisions made in the final rule include: lowering the maximum height for side reaches from 54 to 48 inches (308.3.1) providing a limited exception from this...
-
703.3.1 Dimensions and Capitalization
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
-
F228 Depositories, Vending Machines, Change Machines, and Mail Boxes
These elements are subject to requirements for operable parts in section 309, which specify location within accessible reach ranges and maximum operating forces....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Tax Credits and Deductions
The tax deduction is available to all businesses with a maximum deduction of $15,000 per year....
-
Parking Spaces [4.6.3]
A maximum slope of 2% is required in all directions for both the space and access aisle since level surfaces are important for wheelchair transfer to and from vehicles....
-
Location [§208.3]
A maximum travel distance is not specified in the Standards....
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
AJW Architectural Products U1511EA Series Automatic ADA Compliant Hand Dryer, Universal Voltage - Surface Mounted
Assembled on a plated steel base plate for maximum strength and durability. Cover and Finish: U1511EA: Powder coated (white) formed steel alloy....
-
AJW Architectural Products U190 Series Singlefold Towel Dispenser - Surface Mounted
Door: #22 ga stainless steel with 1/4" returns for maximum rigidity. Slot in door provides a visual paper level check at all times....
-
BEA Inc. PBJ Series Jamb Style Push Plates (Push to Open)
entire surface area of the push plate Stainless steel design is resistant to scratches & scuffing as well as rust Text and logo are abrasive etched onto the surface for maximum...
-
Spectrum Aquatics Portable Aspen Pool Lift
with waterproof remote control 360° continuous rotation in either direction Made from all stainless steel construction (304L Grade) Coated with SpectraShield® for maximum...
