If mirrors are provided, is the bottom of the reflecting surface for the mirror at this lavatory no higher than 40 inches above the floor or is a full length mirror provided?...
Search Results "Floor Designation"
Filters
Commonly Searched Documents
-
H11
-
902.3 Height
The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
§ 36.406(d)(1)
(1) In sleeping rooms with more than 25 beds covered by this section, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....
-
306.3.2 Maximum Depth
Knee clearance shall extend 25 inches (635 mm) maximum under an element at 9 inches (230 mm) above the finish floor or ground....
-
3a.
Note: A ramp, lift, or elevator can be used to provide access to floor levels....
-
4.8.5(2)
(2) If handrails are not continuous, they shall extend at least 12 in (305 mm) beyond the top and bottom of the ramp segment and shall be parallel with the floor or ground surface (see Fig...
-
§100.70(c)(4)
(4) Assigning any person to a particular section of a community, neighborhood or development, or to a particular floor of a building, because of race, color, religion, sex, handicap, familial...
-
§ 35.151(e)(1)
(1) In sleeping rooms with more than 25 beds covered by this section, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....
-
1133A.2, Item 1
A clear floor space at least 30 inches (762 mm) by 48 inches (1219 mm) that allows a parallel approach by a person in a wheelchair shall be provided at the range or cooktop....
-
11B-708.4 Residential dwelling unit communication systems
Communications systems between a residential dwelling unit and a site, building, or floor entrance shall comply with Section 11B-708.4....
-
Backrests
Three different height back supports were designed for this study; a 14-inch, a 17-inch, and a 20-inch....
-
Grab Bars: ADA Standard Section 608.3
Section 608.3 covers the current ADA Standards for grab bars in shower compartments.
-
1009.3.3 Area of Refuge
Stairways shall either incorporate an area of refuge within an enlarged floor-level landing or shall be accessed from an area of refuge complying with Section 1009.6....
-
406.2.2 Clear height
The clear height of each floor level in vehicle and pedestrian traffic areas shall be not less than 7 feet (2134 mm)....
-
Nora Systems, Inc. Norament 920 Stairtreads
Floor covering that meets special fire requirements. Rubber stairtread for your fire safe exit....
-
M101.3 Equivalent Facilitation
The use of alternative designs and technologies that result in substantially equivalent or greater accessibility than specified in the proposed standards is permitted....
-
§ 35.171(a)(2)(i)
(i) If an agency other than the Department of Justice determines that it does not have section 504 jurisdiction and is not the designated agency, it shall promptly refer the complaint to...
-
Murdock Manufacturing Waterless Toilet Riser with Seat and Cover
Product Details Mounting: Floor Mounted Material: Stainless Steel Style: Super Secur...
-
Where must the wheelchair symbol be posted?
The International Symbol of Accessibility (ISA), the familiar person-in-a-wheelchair logo, is the most common and easily recognized symbol designating accessibility....
-
Polling place violations that can be remediated with temporary measures
entrance to the voting area contains a fire extinguisher and two hand sanitizers that protrude more than 4 inches into the route and the bottom of each object is more than 27 inches above the floor...
-
Wheelchair Space or Transfer Seat or Transfer Device
portable rides and a few additional excepted rides, will be required to provide at least one type of access by means of one wheelchair space or one transfer seat or one transfer device (the design...
-
Trail Type
There are three Trails Types: Standard/Terra Trail: A trail that has a surface consisting predominantly of the ground and that is designed and managed to accommodate use on that surface...
-
11B-104.1 Dimensions
Dimensions stated as a "maximum" or "minimum" provide a dimensional range for design purposes. ...
-
407.4.7.1.2 Location
Raised character and braille designations shall be placed immediately to the left of the control button to which the designations apply....
