Secure mounting plate to wall surface at specified location with proper anchors (snugly) until proper centerline dimension is achieved....
Search Results "Fishing Location"
- AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
- Activar Hiawatha HG111 & HG112 Straight Tubular Pulls and HG113 & HG114 Push Bars
- AJW Architectural Products UG20-A Series UG20-A12 12" Concealed Set Screw Flange, 1.25" Diameter Grab Bar - Configuration A
- Corbin Russwin Inc. IN120 Intelligent WiFi Access Control
- Symmons Ultra-Sense Battery Powered Sensor Faucet S-6060
- Pilot Rock FSW-26/18 Campfire Ring
- ClickAndGo Tactile Maps
- Pilot Rock PQT3-4 Square Pedestal Table Using Aluminum
- Excel Dryer, Inc. ThinAir®Hand ADA Surface Mounted Hand Dryer TA-ABS
-
Fur out the wall
604.2 Location. The water closet shall be positioned with a wall or partition to the rear and to one side....
-
California: Toilet Grab Bars - Uneven height allowed?
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
6. Processes for Complying with the ADA
Each town should look at what services, programs, or activities are offered and in what location....
-
Section 36.406(f) Assembly Areas (Section-by-Section Analysis)
The NPRM proposed at Sec. 36.406(f)(1) to require wheelchair spaces and companion seating locations to be dispersed to all levels of the facility that are served by an accessible route....
-
Scope: ADA Standard Section 201.1
Section 201 discusses the scope of the ADA Standards.
-
11B-207.1 General
Placing a directional sign or signs along the main accessible route or routes leading to the inaccessible exit door indicating the location of the nearest accessible exit door can save valuable...
-
Bus Stop Pads
The Board has included clarification that this space be located "entirely within the shelter" so that persons occupying the space can be adequately sheltered from the elements....
-
Issue: 9-1-1 Systems
A TTY must be located at each individual operator station....
-
R304.5.1.2 Shared Use Paths
would renumber R304.5.1 to include a general provision in R304.5.1 that would clarify that if flared sides are provided at curb ramps and blended transitions, the flared sides are to be located...
-
404.2.7 Door and Gate Hardware
Existing locks shall be permitted in any location at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed...
-
404.2.7 Door and Gate Hardware
Existing locks shall be permitted in any location at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed...
-
Viewing Scopes [1011.2, 1011.3, and 1011.8]
The other operable parts of viewing scopes, such as handles or levers, must be located between 15 and 48 inches above the ground and be operable using one hand without tightly grasping,...
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
The Committee recommends exam chairs with a fixed footrest have a transfer surface minimum of a 17 inch depth and a 21 inch width located on both sides of the chair to allow for a left or...
-
What is program accessibility?
For example, if a program has been held in an amphitheater that is not accessible, it should be conducted at an accessible location until the amphitheater is accessible, so that all can...
-
4. My pool already existed before the effective date of the new rule. What am I required to do to provide pool access to customers with mobility disabilities?
The 2010 Standards for pool lifts require lifts to be fixed and to meet additional requirements for location, size of the seat, lifting capacity, and clear floor space....