The low transfer position height, Item A of M301.2.1, shall cease to have effect on [Insert date 5 years after date of publication in the Federal Register].
Search Results "Licensing Exam"
Filters
Commonly Searched Documents
-
M301.2.2 Sunset
-
d. Unobstructed Transfer
The MDE NPRM proposed that each transfer side provide unobstructed access to the transfer surface, with an exception to permit temporary obstructions as long as they could be...
-
M301.2.1 Adjustability (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface height range for diagnostic equipment used by patients in the supine, prone, or side-lying position of 17 inches minimum and 19 inches...
-
M301.2.2 Sunset Provision (Section-by-Section Analysis)
As discussed in Section IV.B.1.a. (Significant Changes – Transfer Surface Adjustability), this is a new provision that was added to the final rule in conjunction with the new...
-
A. Final Regulatory Assessment (EO 13563 and EO 12866)
Executive Orders 13563 and 12866 direct agencies to propose or adopt a regulation only upon a reasoned determination that its benefits justify its costs; tailor the regulation to...
-
M301.4 Lift Compatibility (Section-by-Section Analysis)
The MDE NPRM proposed to require that diagnostic equipment used by patients in the supine, prone, or side-lying position be usable with a patient lift and comply with either the...
-
How to Measure Transfer Surface Height
How to Measure Transfer Surface Height Regardless of the final decision on the low height measurement, the Subcommittee agreed that the height of the transfer surface would be...
-
M102.1 Defined Terms (Section-by-Section Analysis)
platform, patient support surface, transfer supports, positioning supports, prone position, supine position, examination tables, diagnostic purposes, maximum extent possible, landing area, exam...
-
Section 1630.14(b) Employment Entrance Examination
Section 1630.14(b) Employment Entrance Examination An employer is permitted to require post-offer medical examinations before the employee actually starts working. The employer...
-
PART 1: OVERVIEW AND GENERAL REQUIREMENTS
Accessibility of doctors’ offices, clinics, and other health care providers is essential in providing medical care to people with disabilities. Due to barriers, individuals with...
-
M302.4.1 Clearance in Base
The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep...
-
§8.13 Preemployment inquiries.
[See subsections ...]
-
M302.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
Registered Accessibility Specialist (RAS) Bulletin RAS 2014-04 Signs - Exit Doors
RAS 2014-04 Signs - Exit Doors Effective Date: July 7, 2014 2012 TAS Reference: 216.4.1 In accordance with TAS 216.4.1, doors at exit passageways, exit discharges,...
-
Brewer AssistPRO™ Power Procedure Table
The Brewer AssistPRO™ Power Procedure Table's 4-function programmability accommodates multiple positions for a wide variety of procedures. The standard hand pendant and foot control...
-
Brewer Assist Power Procedure Table
The Brewer Assist Power Procedure Table™ can be lowered down to 19" making wheel chair transfers effortless. The 450 lb weight capacity and the additional 5" leg extension...
-
Midmark 647 Barrier-Free® Power Podiatry Procedures Chair
Patient Load Rating: 450 lb. (204 kg) Base Height: Minimum 19" (48.3 cm) Maximum 40" (101.6 cm) Foot Section Height: With foot section retracted 15.5" to 54"...
-
Midmark 630 HUMANFORM™ Procedures Table
Welcome to the new age of clinician-inspired, patient-focused design. The Midmark 630 HUMANFORM™ procedures table is the first of its kind. Designed to complement the human body with...
-
M101.2 Application (Section-by-Section Analysis)
In the NPRM the Access Board proposed that the MDE Standards would be applied to diagnostic equipment based on the patient position the equipment is designed to support....
-
5.1.2 Transfer Surface High Height Recommendations for M301 and M302
5.1.2 Transfer Surface High Height Recommendations for M301 and M302 The Committee recommends an adjustable height range with an upper height measuring at least 25...
-
5.1.3 Transfer Surface Low Height Options for M301 and M302
5.1.3 Transfer Surface Low Height Options for M301 and M302 The Committee did not agree on a final low height recommendation. Rationale for final recommendation (more detail...
-
5.1.3 Transfer Surface Low Height
5.1.3 Transfer Surface Low Height. No agreement on final low height
-
5.1.2 Transfer Surface High Height
5.1.2 Transfer Surface High Height. The transfer surface should have an adjustable height range with an upper height measuring at least 25 inches.
-
5.1.1 Transfer Surface Height Adjustability
5.1.1 Transfer Surface Height Adjustability. The transfer surface should have an adjustable height in small virtually continuous increments.
