[See subsections ...]
Search Results "Full and Fair Cash Value"
-
Fishing Piers and Platforms: ADA Standard Section 1005
-
Installation Height and Location: ADA Standard Section 703.4
Signs with tactile characters shall comply with 703.4.
-
Toilet and Bathing Facilities: ADA Standard Section 807.2.4
Toilet facilities or bathing facilities that are provided as part of a cell shall comply with 603. Where provided, no fewer than one water closet, one lavatory, and one bathtub or...
-
Sales and Service Counters: ADA Standard Section 904.4
Sales counters and service counters shall comply with 904.4.1 or 904.4.2. The accessible portion of the counter top shall extend the same depth as the sales or service counter top. ,...
-
Coat Hooks and Shelves: ADA Standard Section 803.5
Coat hooks provided within the room shall be located within one of the reach ranges specified in 308. Shelves shall be 40 inches (1015 mm) minimum and 48 inches (1220 mm) maximum...
-
Toilet and Bathing Rooms: ADA Standard Section 805.4
Toilet and bathing rooms that are provided as part of a patient or resident sleeping room shall comply with 603. Where provided, no fewer than one water closet, one lavatory, and one...
-
Load and Unload Areas: ADA Standard Section 1002.3
A turning space complying with 304.2 and 304.3 shall be provided in load and unload areas.
-
Toilet and Bathing Facilities: ADA Standard Section 806.2.4
At least one bathroom that is provided as part of a guest room shall comply with 603. No fewer than one water closet, one lavatory, and one bathtub or shower shall comply with...
-
Exercise Machines and Equipment: ADA Standard Section 1004
[See subsections ...]
-
Living and Dining Areas: ADA Standard Section 806.2.1
Living and dining areas shall be accessible.
-
Section 35.151(b) Alterations (Section-by-Section Analysis)
An alteration is considered "substantial" if the total cost of all alterations within any twelve month period amounts to fifty percent (50%) or more of the full and fair cash value of the...
-
4. Benefits of the Proposed Rule
The fact that these benefits could not be formally assessed in this Preliminary RIA should not diminish their importance or value....
-
11B-224.1 General
Certain facilities used for transient lodging, including time shares, dormitories, and town homes may be covered by both these requirements and the Fair Housing Amendments Act....
-
Wheelchair Work Measurement Method
Wheelchair work per meter values for straight and turning were determined for all test course surfaces except sand, under dry conditions using the Wheelchair Work Measurement Method in accordance...
-
Issue 4: Based on available references, can we develop “viable” design standards and guidelines”?
Must they be written in terms of measurable parameters and values? Consensus was not obvious. Must they be written in terms of measurable parameters and values?...
-
What is the minimum level of slip resistance required by the standards?
This value varies according to the measurement method and protocols used. ...
-
Number of Accessible Bathrooms
Many commenters recommended that all full bathrooms be made accessible. Other commenters recommended that only one full bathroom be required to be made accessible....
-
809 Residential Dwelling Units
Both the ADA and ABA establish design requirements for new construction and alterations that ensure full access for persons with disabilities....
-
2. Shoulder Breadth
The 95th percentile values across the 6 sub-groups ranged from 23-27.5 in., and the maximum values ranged from 25-34 in....
-
R103.3 Units of Measurement
The values stated in each system (metric and U.S. customary units) may not be exact equivalents, and each system shall be used independently of the other....
-
§100.135(b)
(b) For the purposes of this section, the term appraisal means an estimate or opinion of the value of a specified residential real property made in a business context in connection with...
-
Allegion Falcon XX Series Cross Bar Exit Devices
The XX Series has a traditional crossbar design that is available with a full range of electrified features....
-
A4.29.2 Detectable Warnings on Walking Surfaces
Contrast in percent is determined by: Contrast = [(B1 - B2)/B1] x 100 where B1 = light reflectance value (LRV) of the lighter area and B2 = light reflectance value (LRV) of the darker...
-
B. Technical standards for criterion-related validity studies
Certain criteria may be used without a full job analysis if the user can show the importance of the criteria to the particular employment context....
