Space between two doors in a series shall be 48 inches (1219 mm) minimum plus the width of a door swinging into the space....
Search Results "Door Opening Angle"
-
1010.1.8 Door arrangement
-
A4.17.5 Doors
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
A4.17.5 DOORS
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
Measuring Door Openings
Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
DORMA BTS75V SERIES DOOR CLOSER
Floor-Concealed Door Closer The BTS75V Series of floor-concealed door closers offer adaptability to almost any installation....
-
Sharing an Access Aisle
The Board has included a requirement that where angled spaces are provided, the access aisle must be located on the passenger side of van spaces (502.3.4)....
-
BEA Inc. LZR Microscan Installation Video
The LZR-microscan is the next generation sensor system for swing door safety. ...
-
Doors in a Series
The required separation between doors and gates in series and specifications for maneuvering clearances at doors will ensure sufficient space regardless of the door swing....
-
T302.3 Openings
Openings in walking surfaces shall not allow the passage of a sphere more than 5/8 inch (16 mm) in diameter....
-
Allegion Falcon SC70 Series Surface Mounted Door Control
Falcon SC70 Series heavy duty closers are built for busy commercial applications that demand reliable door control and easy maintenance. ...
-
Hager Companies 5400 Series - Standard Duty Surface Door Closer
The closers are non-handed to permit installation on doors of either hand. These closers have fixed spring sizes....
-
Revolving Doors or Turnstiles
A commenter advised that no revolving doors or turnstiles should be permitted on an accessible route. Response....
-
Doors at Entrances to Businesses
However, some older doors are less than 36 inches wide and may not provide enough width (32 inch clear width when fully opened). Door openings can sometimes be enlarged....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
Guest Rooms
Because of the social interaction that often occurs in lodging facilities, an accessible clear opening width is required for doors and doorways to and within all guest rooms, including those...
-
Doors and Gates in Series [§404.2.6]
Doors and Gates in Series [§404.2.6] At hinged or pivoted doors or gates in series, a separation is required that is at least 48” plus the width of doors or gates swinging into the space...
-
Allegion Falcon SC80 Series Surface Mounted Door Control
Medium-duty applications like retail storefronts, cafes and clinics that need a closer that makes door operation smooth and secure....
-
DORMA ED700 Low-Energy Swing Door Operator
For best accessibility, the operator can open the door up to an opening angle of 110°. Features Slide track arm available for inswing applications....
-
American Specialties Surface Mounted Bottle Opener 0711-B
Surface Mounted Bottle Opener shall be fabricated of alloy 18-8 stainless steel, type 304, No16 gauge of one piece construction....
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
11B-604.8.1.2 Doors
Where located in the front partition, the door opening shall be 4 inches (102 mm) maximum from the side wall or partition farthest from the water closet....
-
Hager Companies 5300 Series - Heavy Duty Surface Door Closer
These design features make this closer the ideal choice for doors with a maximum weight of 250 lbs....
-
1016.6 Openings
This section requires openings in the surface of outdoor recreation access routes, passing spaces, and resting intervals such as spaces between the boards in a boardwalk and drainage grates...
