Authority: 42 U.S.C. 12101-12213; 49 U.S.C. 322. Source: 56 FR 45621, Sept. 6, 1991, unless otherwise noted.
Search Results "Commuter Rail Car"
-
49 CFR Part 37 - Transportation Services for Individuals with Disabilities (ADA) (with amendments issued through 2015)
-
8. Transportation Vehicles
These requirements apply to new or remanufactured vehicles covered by the ADA, including: buses and vans rail cars (rapid, light, commuter, intercity, high-speed, and monorail...
-
Barriers: ADA Standard Section 1006.3.2
Where curbs or other constructed barriers prevent golf cars from entering a fairway, openings 60 inches (1525 mm) wide minimum shall be provided at intervals not to exceed 75 yards (69 m...
-
11B-1006.3.2 Barriers
Where curbs or other constructed barriers prevent golf cars from entering a fairway, openings 60 inches (1524 mm) wide minimum shall be provided at intervals not to exceed 75 yards (69 m...
-
11B-1006.3.2 Barriers
Where curbs or other constructed barriers prevent golf cars from entering a fairway, openings 60 inches (1524 mm) wide minimum shall be provided at intervals not to exceed 75 yards (69 m...
-
11B-411.2.1.7.4 Adjacency assignment
The system shall assign an elevator car immediately to the left or right of the hall call console....
-
11B-411.2.1.7.4 Adjacency assignment
The system shall assign an elevator car immediately to the left or right of the hall call console....
-
Single Rider Adaptive Golf Cars
Single Rider Adaptive Golf Cars In recent years, single rider adaptive golf cars have been used to increase access for persons with disabilities on golf courses....
-
1005.2 Railings
Where provided, railings, guards, or handrails shall comply with 1005.2....
-
1005.2 Railings
Where provided, railings, guards, or handrails shall comply with 1005.2....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.7.1.4 Visible indicators
The visible indication shall extinguish when the car arrives at the designated floor....
-
11B-407.4.7.1.4 Visible indicators
The visible indication shall extinguish when the car arrives at the designated floor....
-
Buttons: ADA Standard Section 407.4.6.2
Section 407.4.6.2 covers the current ADA Standards for the elevator car control buttons.
-
10.3.2(4)
(4) In light rail, rapid rail and commuter rail key stations, the platform or a portion thereof and the vehicle floor shall be coordinated so that the vertical difference, measured when...
-
§ 37.37(g)
(g) High-speed rail systems operated by public entities are subject to the requirements of this part governing intercity rail systems....
-
Accessible golf cars. (Section-by-Section Analysis)
Accessible golf cars....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
11B-411.2.1.7 Elevator car assignment
When the accessibility function button is pressed, elevator car assignment shall comply with Section 11B-411.2.1.7....
-
11B-411.2.1.7 Elevator car assignment
When the accessibility function button is pressed, elevator car assignment shall comply with Section 11B-411.2.1.7....
-
§ 38.175(b)
(b) All other high-speed rail cars shall comply with the similar provisions of subpart F of this part....