Accessible golf cars....
Search Results "Commuter Rail Car"
Filters
Commonly Searched Documents
-
Accessible golf cars (Section-by-Section Analysis)
-
407.4.1 Car Dimensions
[ECTCR UFAS 4.1.6(4)(c)(ii)] Table 407.4.1 Elevator Car Dimensions Minimum Dimensions Door Location Door Clear Width Inside Car, Side to Side...
-
49 CFR Part 37 - Transportation Services for Individuals with Disabilities (ADA) (with amendments issued through 2015)
Authority: 42 U.S.C. 12101-12213; 49 U.S.C. 322. Source: 56 FR 45621, Sept. 6, 1991, unless otherwise noted.
-
1005.2 Railings
Where provided, railings, guards, or handrails shall comply with 1005.2....
-
1005.2 Railings
Where provided, railings, guards, or handrails shall comply with 1005.2....
-
Alternative Golf Car Passage
A golf car passage is a continuous passage on which a motorized golf car can operate....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
11B-407.4.10.1 Location
Clearance between support rails and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
10.3.2(4)
(4) In light rail, rapid rail and commuter rail key stations, the platform or a portion thereof and the vehicle floor shall be coordinated so that the vertical difference, measured when...
-
§ 38.123(a)(4)
(4) Faucets and flush controls shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist. The force required to activate controls shall...
-
§ 38.125(c)(5) Slope
(5) Slope. Ramps or bridge plates shall have the least slope practicable. If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or...
-
Elevator Car Controls
Comments recommended that the height of elevator car controls be harmonized with the ANSI A117.1 standard....
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
11B-407.4.10.3 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the support rail, fastener, mounting device...
-
1006.3 Golf car Passages
1006.3 Golf Car Passages. Golf car passages shall comply with 1006.3....
-
11B-411.4.1 Car dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Section 11B-407.4.1....
-
11B-411.4.1 Car dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Section 11B-407.4.1....
-
11B-411.4.1 Car dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Section 11B-407.4.1....
-
§ 38.175(b)
(b) All other high-speed rail cars shall comply with the similar provisions of subpart F of this part....
-
National Aging and Disability Transportation Center (NADTC)
The National Aging and Disability Transportation Center is a technical assistance center focused on increasing transportation options for older adults, people with disabilities and...
-
11B-810.5.3 Platform and vehicle floor coordination
, commuter rail, or intercity rail systems: [ADA Title II - Public Transportation] 810.5.3 Platform and Vehicle Floor Coordination. ...
-
11B-810.5.3 Platform and vehicle floor coordination
, commuter rail, or intercity rail systems: [ADA Title II - Public Transportation] 810.5.3 Platform and Vehicle Floor Coordination....
-
11B-810.5.3 Platform and vehicle floor coordination
, commuter rail, or intercity rail systems: [ADA Title II - Public Transportation] 810.5.3 Platform and Vehicle Floor Coordination....
