[See subsections ...]
Search Results "Commuter Rail Car"
Filters
Commonly Searched Documents
-
§ 37.83 Remanufacture of rail vehicles and purchase or lease of remanufactured rail vehicles by public entities operating rapid or light rail systems
-
11B-411.4.6 Elevator car controls
Where provided, elevator car controls shall comply with Sections 11B-411.4.6 and 11B-309.4....
-
11B-411.4.10 Support rail
Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
-
11B-411.4.10 Support rail
Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
-
11B-411.4.10 Support rail
Support rails complying with Section 11B-407.4.10 shall be provided on at least one wall of the car....
-
12162(a) Intercity rail transportation
(a) Intercity rail transportation...
-
§ 38.107(a)(3)
(3) A grab bar at least 24 inches long shall be mounted behind the water closet, and a horizontal grab bar at least 40 inches long shall be mounted on at least one side wall, with...
-
11B-411.4.8 Car position indicators
Audible and visible car position indicators shall be provided in elevator cars....
-
11B-411.2.2.1 Visible identification
Above or adjacent to each elevator car entrance there shall be a visible identification fixture with a car designation character....
-
What kinds of securement equipment must be provided in buses and vans?
Section 38.23(d) of the DOT ADA regulations requires all ADA-compliant buses and vans to have a two-part securement system, one to secure the wheelchair, and a seat belt and...
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Under the broad nondiscrimination provisions in Section 37.5 of the DOT ADA regulations, a transit operator is not permitted to mandate the use by wheelchair users of seat...
-
What kinds of securement equipment must be provided in buses and vans?
Section 38.23(d) of the DOT ADA regulations requires all ADA-compliant buses and vans to have a two-part securement system, one to secure the wheelchair, and a seat belt and shoulder...
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Under the broad nondiscrimination provisions in Section 37.5 of the DOT ADA regulations, a transit operator is not permitted to mandate the use by wheelchair users of seat belts and...
-
§ 37.81 Purchase or lease of used rail vehicles by public entities operating rapid or light rail systems
[See subsections ...]
-
11B-408.4.7 Designations and indicators of car controls
Designations and indicators of car controls shall comply with Section 11B-407.4.7....
-
Size: ADA Standard Section 407.4.6.2.1
Section 407.4.6.2.1 covers the current ADA Standards for the size of the elevator car control buttons.
-
Arrangement: ADA Standard Section 407.4.6.2.2
Section 407.4.6.2.2 covers the current ADA Standards for the arrangement of the elevator car control buttons.
-
16. In § 38.111
§ 38.111 [Amended] 16. In § 38.111,
-
§ 38.117 Floors, steps and thresholds
[See subsections ...]
-
§ 38.127(b)
(b) Each accessible compartment shall contain a restroom complying with §38.123(a) which can be entered directly from such compartment.
-
§ 38.117(b)
(b) All step edges and thresholds shall have a band of color(s) running the full width of the step or threshold which contrasts from the step tread and riser or adjacent floor,...
-
§ 38.111(b)
(b)
-
§ 38.117(a)
(a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant.
-
§ 38.123(b)
(b) Restrooms required to be accessible shall be in close proximity to at least one seating location for persons using mobility aids complying with §38.125(d) of this part and shall...