(DOT ADA Standard 406.8.)...
Search Results "ADA Compliance"
-
Detectable warnings on curb ramps
-
f-i
[ADA Standards § 4.11.3] Yes No...
-
State (Section-by-Section Analysis)
The definition of "State" is identical to the statutory definition in section 3(3) of the ADA....
-
§ 37.123(c)
(c) Individuals may be ADA paratransit eligible on the basis of a permanent or temporary disability....
-
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats
[2010 ADAS] 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats...
-
Architectural Barriers Act
Architectural and Transportation Barriers Compliance Board 1331 F Street, N.W., Suite 1000 Washington, D.C. 20004-1111 www.access-board.gov (800) 872-2253 (voice) (800) 993-2822...
-
1007.12 Alarms/emergency warning systems/accessibility
ETA Editor's Note Sections from California Building Code Chapter 10 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted. ...
-
M301.1 General (Section-by-Section Analysis)
This new exception exempts these diagnostic chairs from compliance with M301’s requirements, as long as the examination chairs comply with the requirements in M302....
-
Ensure that people with mental health disabilities or I/DD have an equal opportunity to participate in and benefit from the entities’ programs, services, and activities
Examples of how local law enforcement, corrections, and justice system leaders have facilitated compliance with this obligation: Trained law enforcement officers not to arrest...
-
H.2. - Does Section 508 apply to a Federal agency's existing EIT procured prior to June 21, 2001?
Although the amendments to Section 508 were effective on August 7, 1998, there were no standards to measure compliance until the standards published by the Access Board became effective...
-
§104.36 Procedural safeguards.
Compliance with the procedural safeguards of section 615 of the Education of the Handicapped Act is one means of meeting this requirement....
-
4. Purpose of Settlement
Purpose of Settlement To avoid the cost, expense, and uncertainty of protracted litigation and preclude any similar lawsuits or challenges during the Compliance Period, the City and...
-
Applying the Forest Service Outdoor Recreation Accessibility Guidelines
The first step in applying Forest Service Outdoor Recreation Accessibility Guidelines (FSORAG) is to know when and where compliance is required....
-
Alterations [4.1.6(1), (2)]
Compliance is governed by the scope of work and can be followed on an element-by-element basis unless the work, when taken together, amounts to a full alteration of the space....
-
4.1.6(4)(e)
Where alterations to existing facilities make strict compliance with 4.22 and 4.23 structurally impracticable, the addition of one "unisex" toilet per floor containing one water closet complying...
-
D. Suites:
Should any of these suites later be marketed or sold to the public on a season basis, PSE shall make the suites (including the toilet rooms) accessible in compliance with the 2010 Standards...
-
II-3.5400 Surcharges
Although compliance may result in some additional cost, a public entity may not place a surcharge only on particular individuals with disabilities or groups of individuals with disabilities...
-
907.5.2.3.4 Groups R-2.1, R-3.1 and R-4
ETA Editor's Note The remainder of California Building Code Chapter 9, is not adopted by the Division of the State Architect - Access Compliance (DSA-AC), and has been omitted....
-
Regulatory Process Matters
Harmonizing the accessibility guidelines for the ADA and the Architectural Barriers Act (ABA) with the International Building Code and the ICC/ANSI A117.1 standard promotes increased compliance...
-
8. Revisions to Exceptions under 508 Standards
This is consistent with the ADA and ABA Accessibility Guidelines, which exempt such spaces from accessibility requirements....
-
B. Survey and Review of Polling Place Locations
The survey instrument is based on the 2010 Standards and the United States’ “ADA Checklist for Polling Places” publication. ...
-
Data Collection Procedures
In the event any non-compliance issues were identified on site, the designee could easily be alerted and initiate the agency process for maintenance or other corrective actions. ...
-
11B-104.1.1 Construction and manufacturing tolerances
[2010 ADAS] Advisory 104.1.1 Construction and Manufacturing Tolerances. ...
-
How to Use the Pressure Gauge Tool
A short tutorial on how to use a pressure gauge tool for compliance surveys in the field....
