Doors shall not swing into the clear floor space required by 903.2....
Search Results "High Energy Door"
-
612.2 Bench
-
Sec.36.401(b)(2)
portion of the residence covered under paragraph (b)(1) of this section extends to those elements used to enter the commercial facility, including the homeowner's front sidewalk, if any, the door...
-
Buildings in Recreation Sites
Permanent buildings with walls, roof, and a door at recreation areas must meet all the applicable provisions of ABAAS, as well as those of other applicable building codes....
-
Operable Parts [§309]
They are also referenced by technical sections of the standards covering drinking fountains, faucet and flush controls, ATM and fare machines, appliances, storage, windows, and door and...
-
Access to Approach, Enter, and Exit Work Areas
Access for “approach, entry, and exit” requires a connecting accessible route to the work area and a compliant entrance, including entry doors or gates, plus wheelchair space in the work...
-
612.2 Bench
Doors shall not swing into the clear floor space required by 903.2....
-
Salsbury Industries Designer Wood Locker Six Tier Box Style 1 Wide
Features Constructed of industrial grade particleboard and covered with durable high pressure laminate Ideal for health clubs, locker rooms, country clubs, day spas, sports and athletic...
-
Salsbury Industries Designer Wood Locker Six Tier Box Style 3 Wide
Features Constructed of industrial grade particleboard and covered with durable high pressure laminate Ideal for health clubs, locker rooms, country clubs, day spas, sports and athletic...
-
M302.4.1 Clearance in Base
The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
M301.4.1 Clearance in Base
The base of diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured...
-
1015.3 Viewing Space
The viewing space shall be 32 inches (815 mm) maximum and 51 inches (1295 mm) minimum high above the ground and shall extend the full width of the clear ground space....
-
Verify Rough Plumbing
Both high and low 11B-602...
-
3.2 Physical Accessibility Barriers and Solutions
Barriers Solutions Simple/Low cost Involved / High cost Protruding Objects mounted on the wall (e.g., fire extinguisher) may endanger...
-
Verify Rough Plumbing
Both high and low 11B-602...
-
4.1.4(3) MILITARY HOUSING
either accessible or readily and easily modifiable to be accessible, but in any event, modification of individual units (including the making of adaptations), will be accomplished on a high...
-
Disability Employment Initiative
A graduate of East Peoria High School in Illinois who has a developmental disability participates in job training. — Life Academy...
-
Engineered vs. Outside
The high R2 values for the engineered surfaces show that vibrations for a particular surface can be predicted by knowing the surfaces roughness....
-
1015.3 Viewing Space
The viewing space shall be 32 inches (815 mm) maximum and 51 inches (1295 mm) minimum high above the ground and shall extend the full width of the clear ground space....
-
4.1.3 Wheelchair Seating Space
Knee space for wheelchair seating shall be at least 27 inches (685 mm) high, 30 inches (760 mm) wide, and 19 inches (485 mm) deep....
-
Recumbent Tricycles
Manufacturers strive to maintain a low center of gravity and use high-tech steering mechanisms to overcome turning instability problems....
-
M302.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured...
-
M301.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured...
-
Protrusion Limits [§307.2]
Those with leading edges that are within cane sweep (27” high maximum) or that provide minimum headroom clearance (80” minimum) do not pose hazards and can protrude any amount....
-
§ 38.159(b)(8) Platform entrance ramp
Thresholds between 1/4 inch (6.5 mm) and 1/2 inch (13 mm) high shall be beveled with a slope no greater than 1:2....
