Access for “approach, entry, and exit” requires a connecting accessible route to the work area and a compliant entrance, including entry doors or gates, plus wheelchair space in the work...
Search Results "Wheelchair Space"
Commonly Searched Documents
-
Access to Approach, Enter, and Exit Work Areas
-
Platform Size and Surface
Platform Size and Surface To be part of an accessible route, lift platforms must provide the amount of clear space required for wheelchairs in ADAAG 4.2.4....
-
Storage [9.2.2(4)]
Clear floor space for either a forward or side approach is allowed....
-
Single-User Toilet Rooms: Split Plumbing
While the knee and toe clearance required at lavatories may allow a forward approach to door hardware, if placed in the maneuvering space, lavatories interfere with wheelchair maneuvering...
-
212 and 606 Kitchens, Kitchenettes, Lavatories, and Sinks
The 2010 Standards include an exception that permits the clear floor space to be positioned for a parallel approach at kitchen sinks in any space where a cook top or conventional range is...
-
7b.
[ADA Stds 4.13.9] Yes _____ No _____ A clear floor space on the latch side of the door (pull side) allows a person using a wheelchair or scooter to pull the door open and then...
-
Doors and Gates in Series [§404.2.6]
Doors and Gates in Series [§404.2.6] At hinged or pivoted doors or gates in series, a separation is required that is at least 48” plus the width of doors or gates swinging into the space...
-
Are side flares required at curb ramps?
Side flares are essential in alterations when space for a top landing (36” deep min.) is not available; in this instance, side flares (1:12 max. slope) are necessary to accommodate wheelchair...
-
3.15
3.15 Nothing in this Consent Order shall limit the placement of any additional wheelchair spaces required by state or local codes beyond those mandated under the ADA Standard 4.33.3 and...
-
ADA Compliant Plumbing Products for Accessible Kitchens and Baths - CEU Course
Ergonomics. Technology. ADA regulations. The delivery of water raises a variety of design issues and opportunities. Delta Faucet Company now offers several AIA-approved...
-
1118B.3
SECTION 1118B - SPACE ALLOWANCE AND REACH RANGES 1118B.3 Wheelchair turning space. ...
-
9.6 ATTENDANCE-RECORDING EQUIPMENT
Time clocks, card racks, log books, and other work assignment or attendance-recording equipment used by people in wheelchairs must be installed at a height no more than 48 in (1220 mm) above...
-
Why is a top landing required at curb ramps if side flares are provided?
They are not designed to accommodate wheelchair maneuvering except in alterations where space constraints preclude a compliant top landing....
-
Clearances [§403.5]
Greater clearance is required for 180 degree turns around narrow obstructions and for wheelchair turning space....
-
Obstructions [4.7.8]
Space is needed at the top and bottom of ramps so that people using wheelchairs can align with the running slope and maneuver from ramps, including when making turns (which is difficult...
-
§ 38.159(d)(2) Location and size
Such space shall adjoin, and may overlap, an access path....
-
A) Accessible Parking
The access aisle is just wide enough to permit a person using a wheelchair to enter or exit the car....
-
Parking
Parking The chart below indicates the number of accessible spaces required by the 2010 Standards. One out of every six accessible spaces must be van-accessible....
-
Architectural Barriers
They can include parking spaces that are too narrow to accommodate people who use wheelchairs; a step or steps at the entrance or to part of the selling space of a store; round doorknobs...
-
1.17 Unobstructed view
screen that is not blocked or interfered with by any seats, railings, or other objects and is configured to have visual clearance over average height patrons seated one row ahead of the wheelchair...
-
Transfer Platform
Transfer Platform Each transfer system must have a platform on the deck surface so users can maneuver on and off the system from their mobility device or wheelchair....
-
4.34.2(9)
(9) All controls in accessible spaces shall comply with 4.27....
-
3.3.13 360-Degree Turn
Less than 50% of our manual and powered wheelchair users completed a 360-degree turn within the United States standard turning diameter (Figure 3‒12)....
-
Benches
Benches in amphitheaters must comply with the requirements in ABAAS section F221 for assembly areas, including wheelchair spaces, companion seats, designated aisle seats, and lawn seating...