Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1015 mm) maximum above the finish floor or ground....
Search Results "Extended Floor Surface"
-
603.3 Mirrors
-
11B-502.3.2 Length
Access aisles shall extend the full required length of the parking spaces they serve....
-
11B-502.3.2 Length
Access aisles shall extend the full required length of the parking spaces they serve....
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
, which can extend to a height of 4 inches above the floor at a depth of 28 inches....
-
6b.
Is the change in level from the floor to the lift surface ramped or beveled? Yes _____ No _____...
-
Toilet Buildings and Pit Toilets
The depth of the clear space is measured from the back of the riser and extends in front of the riser (figure 110)....
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings at perpendicular curb ramps shall extend 36 inches (914 mm) in the direction of travel....
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings at perpendicular curb ramps shall extend 36 inches (914 mm) in the direction of travel....
-
§ 38.159(d)(4) Orientation
The padded barrier shall extend from a height of 38 inches (965 mm) from the vehicle floor to a height of 56 inches (1420 mm) from the vehicle floor with a width of 18 inches (455 mm), laterally...
-
Maximum Depth: ADA Standard Section 306.2.2
Section 306.2.2 covers the current ADA Standards for the maximum depth for toe clearance.
-
Length: ADA Standard Section 503.3.2
Section 503.3.2 covers the current ADA Standards for the required length of access aisles at passenger loading zones.
-
11B-503.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
11B-503.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
Height of Tables or Counters [4.32.4]
Height of Tables or Counters [4.32.4] Counter and table surface heights (28 to 34 inches) should be specified in consideration of the intended use....
-
11B-603.3 Mirrors
Mirrors located above lavatories or countertops shall be installed with the bottom edge of the reflecting surface 40 inches (1016 mm) maximum above the finish floor or ground....
-
1134A.6, Item 2
The maximum slope of the shower floor shall be ½ inch (12.7 mm) per foot in any direction and shall slope to a drain....
-
1134A.6, Item 2
The maximum slope of the shower floor shall be ½ inch (12.7 mm) per foot in any direction and shall slope to a drain....
-
11B-809.10.6.2 Slope
The slope of the shower floor shall be 1/2 inch (12.7 mm) per foot maximum in any direction and shall slope to a drain....
-
Sec.36.403(c)(1)(ii)
(ii) Replacing an inaccessible floor surface in the customer service or employee work areas of a bank;...
-
§ 36.403(c)(1)(ii)
(ii) Replacing an inaccessible floor surface in the customer service or employee work areas of a bank;...
-
11B-809.8.3 Door maneuvering clearance.
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance....
-
Can parking signage height be considered a "safe harbor"?
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign.” ...
-
Why Comprehensive "Bio-Hazard" Sanitization is Now a Standard for Emergency Services in Philadelphia
The walls are no longer just surfaces; they are barriers that have been scrubbed and treated to ensure they don't harbor hidden threats....
-
11B-405.7.3.1
Bottom landings shall extend 72 inches (1829 mm) minimum in the direction of ramp run....