Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
Search Results "Input Floor"
-
404.2.7 Door and Gate Hardware
-
4.21.3 SEAT
The seat shall be mounted 17 in to 19 in (430 mm to 485 mm) from the bathroom floor and shall extend the full depth of the stall. The seat shall be on the wall opposite the controls....
-
What types of electrical or communication receptacles are exempt because they serve a “dedicated use”?
Floor electrical receptacles are also exempt. Communication receptacles serving a dedicated use include phone jacks, data ports, network and audio-visual connections....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-407.2.1.1 Height
[2010 ADAS] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline of...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-604.7.2 Disposal units
The disposal unit shall be located below the grab bar with the opening of the disposal unit 19 inches minimum (483 mm) above the finish floor....
-
11B-407.2.1.1 Height
[2010 ADA Standards] EXCEPTION: Existing call buttons and existing keypads shall be permitted to be located at 54 inches (1370 mm) maximum above the finish floor, measured to the centerline...
-
11B-407.2.2.1 Visible and audible signals
Where in-car signals are provided, they shall be visible from the floor area adjacent to the hall call buttons. Exceptions: Reserved. Reserved....
-
11B-306.3.4 Clearance reduction
Between 9 inches (229 mm) and 27 inches (686 mm) above the finish floor or ground, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for each 6 inches...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-308.3.2 Obstructed high reach
Where a clear floor or ground space allows a parallel approach to an element and the high side reach is over an obstruction, the height of the obstruction shall be 34 inches (864 mm) maximum...
-
Notes
II The IDeA Center in its research defined wheelchair wheelbase as the distance from the center of the primary drive wheel to the center of the caster measured parallel to the floor....
-
IV. Program Access
., moving a public information office from the third floor to the first floor of a building....
-
11B-604.7 Dispensers and disposal units
The outlet of the dispenser shall be below the grab bar, 19 inches (483 mm) minimum above the finish floor and shall not be located behind grab bars....
-
Good Practices of Accessible Urban Development: Making Urban Environments Inclusive and Fully Accessible to ALL
extend special appreciation to the many contributors, especially those from the offices of UN-Habitat and the Secretary-General’s Special Envoy on Disability and Accessibility for their inputs...
-
Neo-Metro Metaal Toilet Configured for In-Wall Flushing System
Accessibility: ADA Compliant Model(s) Available Material: Stainless Steel Mount: Floor Mounted Against Wall Flushing: Classified as High Efficiency Toilet/Urinal , In-Wall Flush...
-
Wikk AccessAbility ™ “Long Ranger” 868 Mhz Transmitters and Receivers
Wikk AccessAbility ™ “Long Ranger” 868 Mhz Transmitters and Receivers can penetrate through stainless, aluminum, brass or steel bollards as well as concrete walls, floors and metal housings...
-
Cybex Total Access Arc Trainer
This allows fitness enthusiasts who have physical or sensory limitations to take advantage of fitness training on the same gym floor and using the same equipment as those who do not....
-
Wikk Industries Ingress'r Automatic Door Control
conduit in surface wiring applications Fits perfectly onto a 6” x 6” x 42” commercial height bollard where wall mounting is not practical Recommended mounting height is 3” from finished floor...
-
Guldmann GL5 Mobile Lifter
Both models feature electric lifting and width adjustment to allow easy access around chairs, baths and the ability to lift from the floor....
-
Whitehall Mfg. WH3740 Ligature Resistant Stainless Steel Basin
Product Details Width: 19" Material: Stainless Steel Vandal Resistant: Moderate Waste Location: Wall Brand: BestCare Off-Floor/Wall...
-
BraunAbility UVL Wheelchair Lift for Cutaway Buses and Paratransit Vans
Features include: NHTSA Compliant 750lb lifting capacity Floor to ground lift heights up to 63" Excellent reliability and durability...
-
1115B.3.2, Item 3
.|_ On the other side of the water closet, provide a minimum of 28 inches (711 mm) wide clear floor space if the water closet is adjacent to a fixture or a minimum of 32 inches (813 mm)...
