Thresholds, if provided at doorways, shall be 1/2 inch (13 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with 302 and 303....
Search Results "Grade 1 Braille"
-
404.2.5 Thresholds
-
410.6.3.1 PSTN (Section-by-Section Analysis)
with real-time two-way voice communication interoperates with the publicly switched telephone network (PSTN), real-time text conform to TIA 825-A (incorporated by reference in 508 Chapter 1...
-
4.10.9 Floor Plan of Elevator Cars
The clearance between the car platform sill and the edge of any hoistway landing shall be no greater than 1‒1/4 in (32 mm)....
-
4.10.9 FLOOR PLAN OF ELEVATOR CARS
The clearance between the car platform sill and the edge of any hoistway landing shall be no greater than 1-1/4 in (32 mm)....
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
404.2.5 Thresholds
Thresholds, if provided at doorways, shall be 1/2 inch (13 mm) high maximum. Raised thresholds and changes in level at doorways shall comply with 302 and 303....
-
Gangway Slope and Rise Exceptions
As a minimum however, gangways must be designed to provide for a maximum 1:12 (8.33%) slope but are not required to be longer than 80 feet in length....
-
§ 37.42 Service in an Integrated Setting to Passengers at Intercity, Commuter, and High-Speed Rail Station Platforms Constructed or Altered After February 1, 2012
[See subsections ...]
-
§ 37.42 Service in an Integrated Setting to Passengers at Intercity, Commuter, and High-Speed Rail Station Platforms Constructed or Altered After February 1, 2012
[76 FR 57935, Sept. 19, 2011]
-
Grab Bar Cross Sections
The proposed rule specified 1 ¼ to 1 ½ circular cross sections....
-
1018.1 General
EXCEPTIONS: 1....
-
QUESTION: WHEN DO THE REQUIREMENTS OF SECTION 37.42 BEGIN TO APPLY?
standard and other requirements of section 37.42(a) apply to stations that are approved for entry into final design or that begin construction or alteration of platforms on or after February 1,...
-
Parking
Total Number of Parking Spaces Provided in Parking Facility Minimum Number of Required Accessible Parking Spaces 1 to 25 1...
-
1018.1 General
EXCEPTIONS: 1....
-
11B-505.6 Gripping surface
Where provided, horizontal projections shall occur 1½ inches (38 mm) minimum below the bottom of the handrail gripping surface. Exceptions: 1. ...
-
1007.2 Accessible Routes
EXCEPTIONS: 1. Playing surfaces shall not be required to comply with 302.2. 2....
-
FTA Circular 4710.1: Americans with Disabilities Act Guidance
(Link is to PDF document online) November 4, 2015 Subject: AMERICANS WITH DISABILITIES ACT (ADA): GUIDANCE 1. PURPOSE....
-
11B-224.2 Guest rooms with mobility features
1 0 1 2 to 25 1 1 [2010 ADA Standards] 0 2 [2010 ADA Standards] 1 26 to 50 2 1 ...
-
Re: When is a Curb Ramp a Ramp?
Curb height say 6'' The lowest slope for a ramp would be 5.1% or just under 1:20 So if the walkway was shorter than 10' I think it could be called a curb ramp and would only require...
-
Salsbury Industries Designer Wood Locker
Requires the Registered User plan or above. Login! -
F208.2 Minimum Number
F208.2 Parking Spaces Total Number of Parking Spaces Provided in Parking Facility Minimum Number of Required accessible Parking Spaces 1 to 25 1...
