The platform surface shall be free of any protrusions of 1/4 inch (6.5 mm) high and shall be slip resistant....
Search Results "Grade 1 Braille"
-
§ 38.159(b)(6) Platform surface
-
1007.2 Accessible Routes
EXCEPTIONS: 1. Playing surfaces shall not be required to comply with 302.2. 2....
-
1007.2 Accessible Routes
EXCEPTIONS: 1. Playing surfaces shall not be required to comply with 302.2. 2....
-
III-7.7000 Alterations
For instance -- 1) Section 4.1.6(3) contains a detailed set of special technical provisions for alterations to be applied where it is technically infeasible to comply with other provisions...
-
Section E: Route from Entrance
(§303.3) E6 Is the running slope of part of the route greater than 1:20?...
- BEST Door Lever Hardware Cylindrical Locks - 9K
- Structured Negotiation: A Winning Alternative to Lawsuits
-
Cross Slope
Comments indicated that specifications for cross slope (1:48 maximum) are not referenced in the curb ramp section. Response....
-
12204(c)(2) Sites eligible for listing in national register
.), the guidelines described in paragraph (1) shall, at a minimum, maintain the procedures and requirements established in 4.1.7 (1) and (2) of the Uniform Federal Accessibility Standards...
-
How are charges of discrimination filed?
If there is no EEOC office nearby, call, toll free 1-800-669-4000 (voice) or 1-800-800-3302 (TDD)....
-
404.3 Automatic and Power-Assisted Doors and Gates
Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
Cross Slope [1016.7.2]
When the surface is constructed of concrete, asphalt, or boards, the cross slope must be no steeper than 1:48 (2 percent)....
-
404.3 Automatic and Power-Assisted Doors and Gates
Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
12204(c)(2) Sites eligible for listing in National Register
.), the guidelines described in paragraph (1) shall, at a minimum, maintain the procedures and requirements established in 4.1.7(1) and (2) of the Uniform Federal Accessibility Standards...
-
407.12.1.1 Vertical Plane for Side Reach (Section-by-Section Analysis)
This side reach requirement mirrors existing 508 Standards § 1194.25(j)(1) and Figure 1....
-
1008.1.9.7, Item 5
THIS DOOR WILL OPEN IN 15 [30] SECONDS ALARM WILL SOUND” Sign lettering shall be at least 1 inch (25 mm) in height and shall have a stroke of not less than 1/8 inch (3.2 mm)....
-
68.20. Buildings and Facilities Subject to Compliance with the Texas Accessibility Standards
Buildings and Facilities Subject to Compliance with the Texas Accessibility Standards (New rule section effective November 5, 2001, 26 TexReg 8807; amended effective February 1, 2005, 30...
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
505.1 General
Handrails are not required on walking surfaces with running slopes less than 1:20....
-
505.1 General
Handrails are not required on walking surfaces with running slopes less than 1:20....
-
B. Communication Rooms
[ADA Stds. 9.1.3] (Table 9.1.3) Number of Rooms In the Hotel Rooms for Hearing Impaired Guests 1 - 25 1 26...
-
11B-505.1 General
Handrails are not required on walking surfaces with running slopes less than 1:20....
-
Gangway Slope and Rise Exceptions
As a minimum however, gangways must be designed to provide for a maximum 1:12 (8.33%) slope but are not required to be longer than 80 feet in length....
- SDC EMLock® Magnetic Lock