Do the parking spaces and access aisles have surface slopes less than 1:50 (i.e.: when measured as shown on the Tools & Techniques page , is the critical dimension 1/2" or less)?...
Search Results "Grade 1 Braille"
-
C. Parking Slope
-
5.1.8 Slope
The slope of the surface of the clear ground space shall not be steeper than 1:48 in any direction....
-
29. Please indicate what the length of time was between the installation of the trail surface material and the first necessary repair
Please indicate what the length of time was between the installation of the trail surface material and the first necessary repair: 1 month 3 months 6 months...
-
1012.5 Slope
The slope of the surface of parking spaces and pull-up spaces shall not be steeper than 1:48 in any direction....
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
GUARD OR GUARDRAIL
GUARD [DSA-AC, HCD 1, HCD 2 & HCD 1-AC] OR GUARDRAIL....
-
F221.2.1.1 General Seating
assembly size] Table F221.2.1.1 Number of Wheelchair Spaces in Assembly Areas Number of Seats Minimum Number of Required Wheelchair Spaces 4 to 25 1...
-
68.1. Authority
(Effective June 1, 1994, 19 TexReg 3485, amended effective December 5, 1999, 24 TexReg 10855; repealed effective November 5, 2001, 26 TexReg 8807; new rule section effective November 5,...
-
68.100. Technical Standards and Technical Memoranda
(Effective April 1, 1994, 19 TexReg 167; amended effective June 26, 2000, 25 TexReg 6122; repealed effective November 5, 2001, 26 TexReg 8807, new rule section effective November 5, 2001...
-
2.7 Tread Obstacles
Where tread obstacles exist on the surface of an ORAR, they shall not exceed 1 inch (25 mm) in height....
-
505.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6 1/4 inches (160 mm) maximum, and a cross-section dimension...
-
4.3.3 Slope
The slope of tent pads and tent platforms shall not exceed 1:48 (2 percent) in any direction. Exception....
-
1014.3 Floor
This section requires the floor surface within camp shelters to be firm and stable and to slope not steeper than 1:48 in any direction....
-
1013.3 Slope
This section requires the slope of the surface of tent pads, tent platforms, and clear ground spaces to not be steeper than 1:48 in any direction....
-
68.102. Public Right-of-Ways Projects
(New section effective February 1, 2005, 30 TexReg 382; amended effective March 1, 2007, 32 TexReg 884; amended effective March 15, 2012, 37 TexReg 677; amended effective May 15, 2017, 42...
-
505.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6 1/4 inches (160 mm) maximum, and a cross-section dimension...
-
Acess-Able Designs Portable Tub/Shower Transfer Bench SH-425
First commercial-grade portable tub/shower seat on the market. ...
-
11B-407.4.1 Car dimensions
80 inches (2032 mm) 51 inches (1295 mm) 54 inches (1372 mm) Side (off-centered) 36 inches (914 mm)1...
-
11B-407.4.1 Car dimensions
80 inches (2032 mm) 51 inches (1295 mm) 54 inches (1372 mm) Side (off-centered) 36 inches (914 mm)1...
-
Expert Report of John Rife Torkelson, theACCESSpartnership, L.P. (August 8, 2018)
Sidewalks & Walkways: The ramp slope is greater than 1:12 (1991 ADA Stds 4.8.2; 2010 ADA Stds 405.2)....
-
11B-405.3 Cross slope
Cross slope of ramp runs shall not be steeper than 1:48. Advisory 11B-405.3 Cross slope. Cross slope is the slope of the surface perpendicular to the direction of travel....
-
PUBLIC BUILDING OR FACILITY
[DSA-AC] A building or facility or portion of a building or facility designed, constructed, or altered by, on behalf of, or for the use of a public entity subject to Chapter 1, Section 1.9.1.1...
-
PUBLIC BUILDING OR FACILITY
[DSA-AC] A building or facility or portion of a building or facility designed, constructed, or altered by, on behalf of, or for the use of a public entity subject to Chapter 1, Section 1.9.1.1...
-
11B-403.7 Continuous gradient
The slope of the resting area in all directions shall be 1:48 maximum. ETA Editor's Note CBC requirement 11B-403.7 is not present in the 2010 ADA Standards....
