EXCEPTIONS: 1....
Search Results "Grade 1 Braille"
-
M302.2.5 Unobstructed Transfer
-
E. Door Pressure
Door Pressure (1) Defendants will perform door force checks on all public access doors and will adjust or modify as necessary to ensure that they do not require more than five (5) pounds...
-
§8.51(b)
(b) A recipient that employs fifteen or more persons shall, for at least three years following completion of the evaluation required under paragraph (a)(1) of this section, maintain on file...
-
10.1 General
The exceptions for elevators in 4.1.3(5) exception 1 and 4.1.6(1)(k) do not apply to a terminal, depot, or other station used for specified public transportation, or an airport passenger...
-
1018.5 Obstacles
This section requires obstacles to not exceed 1/2 inch in height measured vertically to the highest point....
-
A7. Curb Ramps
Is the slope (up or down the ramp) no more than 1:12? [ADA Stds 4.7.2] Note: 1:12 is one inch of vertical height for each 12 inches in length. Yes _____ No _____...
-
4.8.2* SLOPE AND RISE
The maximum slope of a ramp in new construction shall be 1:12. The maximum rise for any run shall be 30 in (760 mm) (see Fig. 16)....
-
ADA-100® Area of Refuge Communication System
Recorded voice dialer or pager option (ADA-2100) UL listed battery backup system (ADA-BBU-UL) Master Station desktop base (ADA-DTB) Blue (24 VDC) area station flashing strobe light Braille...
-
B. 2004 ADA and ABA Accessibility Guidelines
The 2004 ADA and ABA Accessibility Guidelines contain three parts: application and scoping requirements for facilities covered by the ADA (ADA Chapters 1 and 2); application and scoping...
-
1118B.4
SECTION 1124B - GROUND AND FLOOR SURFACES 1124B.1 General. ...
-
A.4. - Do the requirements of Section 508 apply to acquisitions other than those for EIT?
(See also section B.1.ii below)...
-
SHOULD
[HCD 1 & HCD 2] See "Recommend."...
-
SHOULD
[HCD 1 & HCD 2] See "Recommend."...
-
Allegion LCN 1000 Surface Mounted Door Control
Tested and certified under ANSI Standard A156.4 grade one. Consult factory for details....
-
11B-216.5.1 Parking spaces
Exceptions: 1. Reserved. [2010 ADAS] 1. ...
-
1018.5 Obstacles
Obstacles on beach access routes and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
(d) Outside surface at entry door
primary entry door to a dwelling units with direct exterior access, outside landing surfaces constructed of impervious materials such as concrete, brick, or flagstone should be no more than 1/...
-
DOT Disability Hotline or Hotline:
Members of the public may call 1-800-778-4838 (voice) or 1-800-455-9880 (TTY) from 7 a.m. to 11 p.m....
-
§ 36.105(d)(2)(ii)
(ii) Applying these principles, the individualized assessment of some types of impairments will, in virtually all cases, result in a determination of coverage under paragraph (a)(1)(i) of...
-
11B-505.5 Clearance
Clearance between handrail gripping surfaces and adjacent surfaces shall be 1½ inches (38 mm) minimum....
-
A4.26.1 General
The grab bar clearance of 1‒1/2 in (38 mm) required in this guideline is a safety clearance to prevent injuries resulting from arms slipping through the openings....
-
1018.5 Obstacles
Obstacles on beach access routes and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point....
-
A4.26.1 GENERAL
The maximum grab bar clearance of 1-1/2 in (38 mm) required in this standard is a safety clearance to prevent injuries from arms slipping through the opening....
-
§ 35.108(d)(2)(ii)
(ii) Applying these principles, the individualized assessment of some types of impairments will, in virtually all cases, result in a determination of coverage under paragraph (a)(1)(i) of...
