The words “NO PARKING” shall be painted on the surface within each access aisle in letters a minimum of 12 inches (305 mm) in height and located to be visible from the adjacent vehicular...
Search Results "Work Surface"
Filters
Commonly Searched Documents
-
11B-812.7.3 Lettering
-
Plantronics AME-Q90D Ameriphone TTY
To work with your Q90D, cell phones and cordless phones this system requires a 2.5mm plug (commonly used for hands-free accessories) or a compatible adapter. ...
-
Expert opinion on the current literature
Titles and abstracts of the articles were reviewed internally by two experts with at least four years of direct clinical and research experience working with full-time wheelchair users. ...
-
Training requirement. (Section-by-Section Analysis)
rejected this approach and will not impose any type of formal training requirements or certification process, but will continue to require that service animals be individually trained to do work...
-
1.2.2 Alternative materials, design and methods of construction and equipment
shall be approved where the building official finds that the proposed design is satisfactory and complies with the intent of the provisions of this code, and that the material, method or work...
-
Training requirement. (Section-by-Section Analysis)
rejected this approach and will not impose any type of formal training requirements or certification process, but will continue to require that service animals be individually trained to do work...
-
Section 37.59 Differences in Accessibility Completion Date Requirements
The principle at work in responding to such situations is that if part of a station may be made accessible after another part, the “late” part of the work should not get in the way of people's...
-
Re: Adding an elevator for barrier removal trigger POT upgrades?
Readily achievable barrier removal does not trigger additional path of travel work under the ADA. State and local standards and interpretations may vary. ...
-
804.2.1 Pass Through Kitchen
opposing sides, or where counters, appliances or cabinets are opposite a parallel wall, clearance between all opposing base cabinets, counter tops, appliances, or walls within kitchen work...
-
10. What happens after the complainant agrees to mediate?
Once the respondent agrees, the case manager works with both parties to arrange a mutually agreed upon time, date, and location for the mediation....
-
R103.3 Units of Measurement
Users should work entirely within one system of measurement, either metric or U.S. customary units. Combining values from the two systems may result in non-compliance....
-
Shower
Moreover, the design would work equally well for individuals who could shower independently....
-
11B-407.1 General
The ADA and other Federal civil rights laws require that accessible features be maintained in working order so that they are accessible to and usable by those people they are intended to...
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
RV Parking Spaces Within Camping Units With Mobility Features and RV Pull-Up Spaces at Dump Stations [F244.2.3.2.1 and F244.4]
RV parking spaces within camping units with mobility features and RV pull-up spaces at dump stations must comply with the technical requirements for width, surface, and slope of RV spaces...
-
705.2 Platform Edges
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
A4.17.5 Doors
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
R405.3.1 General
Space under an element between 230 mm (9 in) and 685 mm (2.25 ft) above the finish surface shall be considered knee clearance and shall comply with R405.3....
-
4.15.2* SPOUT HEIGHT
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
A4.17.5 DOORS
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
