There must be an accessible route through the door and to all elements required to be accessible in the room....
Search Results "Non-Fixed Element"
-
Dressing, Fitting, or Locker Rooms
-
Accessible Route
Accessible Route - A continuous unobstructed path connecting all accessible elements and spaces of a building or facility....
-
306.3.3 Minimum Required Depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (280 mm) deep minimum at 9 inches (230 mm) above the finish floor...
-
4.1.2(7) Building Signage
Elements and spaces of accessible facilities which shall be identified by the International Symbol of Accessibility and which shall comply with 4.30.7 are:...
-
Context
Shapes of landscape features such as mountains were easily identifiable but unexpected elements such as a sailboat were not....
-
F245.4.2 Routes to and within Common Use and Public Use Areas
access route to connect each picnic unit with mobility features with common use and public use areas serving the unit; and at least one outdoor recreation access route to connect accessible elements...
-
Clear Floor or Ground Space and Turning Space
Clearances are required at accessible elements, fixtures, and controls so that people with disabilities, including those who use wheelchairs, can approach and use them....
-
Sections 4.2 Through 4.35 (Section-By-Section Analysis and Response to Comments)
- Sections 4.2 Through 4.35 (Section-By-Section Analysis and Response to Comments) Sections 4.2 through 4.35 contain the technical specifications for elements and spaces required to be...
-
F205.1 General
Operable parts on accessible elements, accessible routes, and in accessible rooms and spaces shall comply with 309. EXCEPTIONS: 1....
-
205.1 General
Operable parts on accessible elements, accessible routes, and in accessible rooms and spaces shall comply with 309. EXCEPTIONS: 1....
-
New construction and alteration requirements
Alterations to facilities, spaces or elements (including renovations) on or after January 26, 1992, also must comply with the Standards....
-
R404 Clear Spaces (Section-by-Section Analysis)
Additional maneuvering space must be provided where an element is confined on all or part of three sides....
-
4.1.6(3)(d)
EXCEPTION: If the cost of the elements and spaces required by 4.1.6(3)(a), (b), or (c) exceeds 15 percent of the total cost of all other alterations, then a schedule may be established by...
-
ALTERATION
to, remodeling, renovation, rehabilitation, reconstruction, historic restoration, resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural parts or elements...
-
11B-225.3 Self-service storage facilities
Although there are no technical requirements that are unique to self-service storage facilities, elements and spaces provided in facilities containing self-service storage spaces required...
-
When is a Curb Ramp a Ramp?
Non Compliant Sloped Walk? Compliant Curb Ramp? Or Non-Compliant Ramp?. ...
-
5 Key Warranty Features to Compare Before Hiring a Roofer
Second, check for non-prorated coverage. Many warranties lose value over time, meaning if your roof fails in year 15, the company might only pay 40% of the replacement cost....
- Landscape Forms Inc. FGP Trash Receptacle
- Better Living LINEA Luxury Soap Dispenser
-
Wheelchair Securement Systems
First, in large non-rail vehicles with a gross vehicle weight rating of 30,000 pounds or more, the proposed rule reduced from 4,000 pounds to 2,000 pounds the minimum force that wheelchair...
-
Designed and Constructed for First Occupancy (Preamble, Section-by-Section Analysis)
First, it is helpful for designers and builders to have a fixed date for accessible design, so that they can determine accessibility requirements early in the planning and design stage....
-
Designed and Constructed for First Occupancy (Section-By-Section Analysis and Response to Comments)
First, it is helpful for designers and builders to have a fixed date for accessible design, so that they can determine accessibility requirements early in the planning and design stage....