Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
Search Results "Maximum Dimension"
-
11B-703.3.2 Position
-
11B-702.1 General
have permanently installed audible and visible alarms complying with NFPA 72 (1999 or 2002 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1), except that the maximum...
-
11B-403.5.1 Clear width
The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by segments that...
-
11B-403.5.1 Clear width
Exceptions: The clear width shall be permitted to be reduced to 32 inches (813 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated...
-
11B-702.1 General
have permanently installed audible and visible alarms complying with NFPA 72 (1999 or 2002 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1), except that the maximum...
-
11B-703.3.2 Position
Braille shall be separated 3/8 inch (9.5 mm) minimum and ½ inch (12.7 mm) maximum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements...
-
EQUIVALENT FACILITATION
Note: In determining equivalent facilitation, consideration shall be given to means that provide for the maximum independence of persons with disabilities while presenting the least risk...
-
11B-504.4.1 Contrasting stripe
The stripe shall be a minimum of 2 inches (51 mm) wide to a maximum of 4 inches (102 mm) wide placed parallel to, and not more than 1 inch (25 mm) from, the nose of the step or upper approach...
-
11B-504.4.1 Contrasting stripe
The stripe shall be a minimum of 2 inches (51 mm) wide to a maximum of 4 inches (102 mm) wide placed parallel to, and not more than 1 inch (25 mm) from, the nose of the step or upper approach...
-
105.2.2 ASME
provisions for escalators require that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum...
-
2. Standing Supports
For horizontal standing supports, the Access Board proposed a gripping surface of 4 inches long minimum, the top of which would be required to be located 34 inches minimum and 38 inches maximum...
-
105.2.2 ASME
provisions for escalators require that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum...
-
4. Breast Platform Adjustability
The MDE NPRM proposed a height range for breast platforms of 30 inches minimum and 42 inches maximum above the floor (proposed M303.4.1)....
-
D. Effective date
New pages on existing websites would need to comply with the Web access requirements to the maximum extent feasible....
-
Impact Annenuation [sic]
G 56 83 60 87 312 313 324 318 H 65 103 69 101 325 493 406 472 The specification calls for a maximum...
-
Vertical Alignment-Crest Vertical Curves
A = algebraic difference in grades (percent) h1 = height of eye (ft) h2 = height of object (ft) The AASHTO Guide for the Development of Bicycle Facilities (p. 36) recommends a maximum...
-
Panda S.51 All Aluminum Folding Door System
Maximum Panel Height: Up to 120″ and up to 144″ with a true divider. Maximum Panel Width: Up to 42″....
-
Assessment factors. (Section-by-Section Analysis)
The NPRM proposed the following specific assessment factors: (1) The dimensions, weight, and operating speed of the mobility device in relation to a wheelchair; (2) the potential risk of...
-
UniversalDesign.com
In addition, they encompass functional, social, and emotional dimensions....
-
TownSteel TDC 90 ALUMINUM Grade 1 Door Closer
optional Fluid All-weather fluid, allowing door closer to perform in temperatures ranging from -31°F to 140°F Needle Bearing Standard for higher efficiency Piston 1-13/32" diameter Maximum...
-
Allegion LCN 1460 Series Surface Mounted Door Control
Designed for maximum versatility, the 1460, available with multiple cover options, can be used for both commercial and institutional applications....
-
TownSteel TDC 70 ALUMINUM Grade 1 Door Closer
Fluid All-weather fluid, allowing door closer to perform in temperatures ranging from -31°F to 140°F Needle Bearing Standard for higher efficiency Piston 1-1/2" (38mm) diameter Maximum...
-
TownSteel TDC 40, CAST IRON Grade 1 Door Closer
Fluid All-weather fluid, allowing door closer to perform in temperatures ranging from -31°F to 140°F Needle Bearing Standard for higher efficiency Piston 1-1/2" (38mm) diameter Maximum...
-
SafetySign Van Accessible Parking Sign (White Text and Border)
Printed image will resist fading and mild chemicals. .063 Aluminum is typically used on parking and traffic signs up to 18” maximum. .080 Aluminum is typically used on parking...
