(3) The depth of a sink bowl shall be no greater than 6-1/2 in (165 mm). Only one bowl of double- or triple-bowl sinks needs to meet this requirement....
Search Results "Grade 2 Braille"
Filters
Commonly Searched Documents
-
4.34.6.5(3)
-
11B-202.3 Alterations
Where existing elements or spaces are altered, each altered element or space shall comply with the applicable requirements of Division 2, including Section 11B-202.4."...
-
§ 38.159(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches (50 mm) high to prevent mobility aid wheels from slipping off....
-
§ 38.95(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.125(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.83(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
Door and Gate Opening Force: ADA Standard Section 404.2.9
Section 404.2.9 covers the current ADA Standards for door and gate opening force.
-
Grab Bars: ADA Standard Section 608.3
Section 608.3 covers the current ADA Standards for grab bars in shower compartments.
-
Entrances: ADA Standard Section 206.4
Section 206.4 covers scoping requirements in the most current ADA Standards for entrances on accessible routes.
-
Ground Level: ADA Standard Section 1008.2.4.1
permitted to be 44 inches (1120 mm) minimum, if at least one turning space complying with 304.3 is provided where the restricted accessible route exceeds 30 feet (9145 mm) in length. 2....
-
Commercial Facilities
[36.104] Facilities – (1) Whose operations will affect commerce; (2) That are intended for nonresidential use by a private entity; and (3) That are not – (i) Facilities that...
-
Audible Signals: ADA Standard Section 407.2.2.3
Section 407.2.2.3 covers the current ADA Standards for elevator audible signals.
-
Rear Wall: ADA Standard Section 604.5.2
Section 604.5.2 covers the current ADA Standards for rear wall grab bars that are used for water closets.
-
Handrails: ADA Standard Section 1009.3.3
Handrail extensions specified by 505.10.1 shall not be required at the bottom landing serving a sloped entry. 2....
-
11B-233.3.1.2.6.5 Additional requirements.
Grab bar reinforcement complying with Sections 11B-809.10.5.2, 11B-809.10.6.4, or 11B-809.10.7.3. 2. Interior door opening width complying with Section 11B-404.3.1. 3....
-
1009.3.3 Area of Refuge
Areas of refuge are not required at stairways in Group R-2 occupancies....
-
11B-221.2.1.1 General seating
NUMBER OF SEATS MINIMUM NUMBER OF REQUIRED WHEELCHAIR SPACES 4 to 25 1 26 to 50 2...
-
Cal-Royal Products Swing Clear Hinges
Swing clear hinges are designed so that when the door is opened to 90 degrees, the door itself is completely out of the openeing. 2-ball bearing is recommended for average frequency doors...
-
Bosch 3 Point Self Leveling Alignment Laser Level GPL 3 S
Batteries, (1) -- Mounting Strap, (1) - Belt Pouch Benefits Three-point plumb and level point projection — accurately transfers and aligns level, plumb, 90° and grade...
-
F233.3.1.2 Residential Dwelling Units with Communication Features
On military installations with residential dwelling units, at least 2 percent, but no fewer than one unit, of the total number of residential dwelling units shall provide communication features...
-
5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides
A minimum 2 inch high edge protection must be provided on both sides of the platform for double ramped entry platforms....
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
I3
[ADA Standards § 4.31.9 (2)] Yes No...
-
A4.26.2 Size and Spacing of Grab Bars and Handrails
This specification allows for alternate shapes of handrails as long as they allow an opposing grip similar to that provided by a circular section of 1‒1/4 in to 1‒1/2 in (32 mm to 38 mm)...
