7. ...do the exterior ramps have running slopes of 1:12 or less (critical dimension of 2" or less)?...
Search Results "Grade 2 Braille"
Filters
Commonly Searched Documents
-
7. Exterior Ramp Running Slope
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
C1-3. Accessible Route Width
If No, the accessible route may narrow to 32 inches wide for up to 2 feet in length. Yes _____ No _____...
-
1. Is this trail designed and managed predominantly as a pedestrian/hiker trail?
If “Yes is selected, then skip to Question #2....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
§ 38.23(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
Self Contained, Closed Products - Side Reach Range
Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
-
11B-408.4.1 Car dimensions and doors
51 inches (1295 mm) minimum shall be permitted to provide a clear depth 51 inches (1295 mm) minimum provided that car doors provide a clear opening 36 inches (914 mm) wide minimum. 2....
-
§8.3 Program or activity
Program or activity means all of the operations of: (a)(1) A department, agency, special purpose district, or other instrumentality of a State or of a local government; or (2) The...
-
10.3.2(4)
stations, the platform or a portion thereof and the vehicle floor shall be coordinated so that the vertical difference, measured when the vehicle is at rest, is within plus or minus 1‒1/2...
-
1017.1 General
When an entity determines that it is impracticable for the entire trail to comply with the technical requirements in 1017, Exception 2 exempts the entire trail from complying with the requirements...
-
Allegion Falcon RU/RW Series Mechanical Locks
It exceeds ANSI Grade 1 specifications and is UL/ULC listed. Incorporates Falcon’s vandal resistant Pressure Release™ trim to prevent damage to internal mechanism....
-
DIRECTIONAL SIGN
[DSA-AC, HCD 1 & HCD 2]. A publicly displayed notice which indicates by use of words or symbols a recommended direction or route of travel....
-
1630.2(j)(3)(II)
(II) In addition to the factors listed in paragraph (j)(2) of this section, the following factors may be considered in determining whether an individual is substantially limited in the major...
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side with a drop off....
-
11B-106.3 Undefined terms
The meaning of terms not specifically listed in Section 11B-106.5, and not defined in Chapter 2, Section 202, or in referenced standards shall be as defined by collegiate dictionaries in...
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
T503.4 Steps at Other Doorways
The walking surface on steps serving all other non-rail vehicle doorways shall be lighted at all times with 2 foot-candles (22 lux) minimum of illumination....
-
6. Amend § 36.302 as follows:
Revise paragraph (c)(2); b. Add paragraphs (c)(3) through (c)(8) and paragraphs (e) and (f) to read as follows:...
-
§100.141 Residential real estate-related lending transaction
Residential real estate-related lending transaction means the making of a loan: (1) For purchasing, constructing, improving, repairing, or maintaining a dwelling; or (2) Secured by...
-
609.2.1 Circular Cross Section
Grab bars with circular cross sections shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-106.3 Undefined terms
The meaning of terms not specifically listed in Section 11B-106.5, and not defined in Chapter 2, Section 202, or in referenced standards shall be as defined by collegiate dictionaries in...
