The requirements in Chapter 6 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
Search Results "Grade 2 Braille"
-
T601.1 Scope
-
T303.3.2 Handrail and Stanchion Circular Cross Section
Handrails and stanchions with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (50 mm) maximum....
-
§8.57 Procedure for effecting compliance.
[53 FR 20233, June 2, 1988; 53 FR 28115, July 26, 1988, as amended at 72 FR 73491, Dec. 27, 2007]...
-
12186(a)(3) Standards
(3) Standards The regulations issued pursuant to this subsection shall include standards applicable to facilities and vehicles covered by sections 12182(b)(2) and 12184 of this title....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
10.2.2(1)
(1) Bus stop sites shall be chosen such that, to the maximum extent practicable, the areas where lifts or ramps are to be deployed comply with section 10.2.1(1) and (2)....
-
3.1.1.1 Vehicle Parking Lots
Vehicle parking lots with more than 2 parking spaces that are not associated with an individual camping or picnic unit shall comply with ABAAS sections 208 and 502....
-
M303.3.2 Beveled
Changes in level between ¼ inch (6.4 mm) high and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2....
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side....
-
DIRECTIONAL SIGN
[DSA-AC, HCD 1 & HCD 2]. A publicly displayed notice which indicates by use of words or symbols a recommended direction or route of travel....
-
§ 37.213(b)
(b) This paragraph (b) applies to small fixed route operators who choose to provide equivalent service to passengers with disabilities under §37.183(b)(2)....
-
§ 38.157(a)
(a) Any stepwell or doorway immediately adjacent to the driver shall have, when the door is open, at least 2 foot-candles of illumination measured on the step tread....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
DIRECTIONAL SIGN
[DSA-AC, HCD 1 & HCD 2]. A publicly displayed notice which indicates by use of words or symbols a recommended direction or route of travel....
-
409.4.4 Leveling
Each car shall automatically stop at a floor landing within a of 1/2 inch (13 mm) under rated loading to zero loading conditions....
-
Global Access Association
These are built upon the enduring Truth of Scripture, with the foundation and cornerstone of Jesus Christ (Ephesians 2:19-22)....
-
COMMERCIAL FACILITIES
Commercial facilities shall not include (1) facilities that are covered or expressly exempted from coverage under the Fair Housing Act of 1968, as amended (42 U.S.C. 3601 - 3631); (2) aircraft...
-
11B-809.10.2 Number of complying bathrooms and fixtures
unit with adaptable features where sanitary facilities are located within the unit or suite must provide at least one bathroom complying with the definition of “bathroom” found in Chapter 2...
-
COMMERCIAL FACILITIES
Commercial facilities shall not include (1) facilities that are covered or expressly exempted from coverage under the Fair Housing Act of 1968, as amended (42 U.S.C. 3601 - 3631); (2) aircraft...
-
11B-703.5.5 Character height
(305 mm) of viewing distance above 72 inches (1829 mm) Greater than 70 inches (1778 mm) to less than or equal to 120 inches (3048 mm) less than 180 inches (4572 mm) 2...
-
11B-703.5.5 Character height
(305 mm) of viewing distance above 72 inches (1829 mm) Greater than 70 inches (1778 mm) to less than or equal to 120 inches (3048 mm) less than 180 inches (4572 mm) 2...
-
11B-809.10.2 Number of complying bathing rooms and fixtures
unit with adaptable features where sanitary facilities are located within the unit or suite must provide at least one bathroom complying with the definition of “bathroom” found in Chapter 2...
-
501.1 Scope
The requirements of Chapter 5 shall apply to ICT software and applications where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements), and where otherwise...
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
