(1) Each facility or part of a facility constructed by, on behalf of, or for the use of a public entity shall be designed and constructed in such manner that the facility or part of the...
Search Results "Design Guideline"
-
§ 35.151(a)(1)
-
§ 35.172(c)
(c) Where appropriate, the designated agency shall attempt informal resolution of any matter being investigated under this section, and, if resolution is not achieved and a violation is...
-
12206(d)(2) Dissemination of information
(2) Dissemination of information Such grants and contracts, among other uses, may be designed to ensure wide dissemination of information about the rights and duties established by this...
-
Jamb Signage
...are all elevator jambs provided with signs placed on both sides designating the floor with 2" minimum height raised letters and Braille characters centered at 60" above the finish floor...
-
11B-411.2.1.4.1.2 Identification
Identification shall be placed immediately to the left of the control button to which the designation applies....
-
11B-206.7.2 Wheelchair spaces
accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of Sections 11B-221 _|Assembly Areas|_ and 11B-802 _|Wheelchair Spaces, Companion Seats, and Designated...
-
QUALIFIED HISTORIC BUILDING OR FACILITY
[DSA-AC] A building or facility that is listed in or eligible for listing in the National Register of Historic Places, or designated as historic under an appropriate State or local law....
-
4.13.2 Revolving Doors and Turnstiles
An accessible gate or door shall be provided adjacent to the turnstile or revolving door and shall be so designed as to facilitate the same use pattern....
-
5e.
Are signs mounted on both sides of the elevator hoistway door opening that designate the floor with 2-inch minimum-height raised letters and Braille characters centered at 60 inches above...
-
§100.205(g)(1)
units of general local government to include, in their existing procedures for the review and approval of newly constructed covered multifamily dwellings, determinations as to whether the design...
-
Stability or Stable Surface
that remains unchanged by contaminants or applied force, so that when the contaminant or force is removed, the surface returns to its original condition (2010 ADA Standards for Accessible Design...
-
4.13.2 REVOLVING DOORS AND TURNSTILES
An accessible gate or door shall be provided adjacent to the turnstile or revolving door and shall be so designed as to facilitate the same use pattern....
-
§ 35.151(a)(1)
(1) Each facility or part of a facility constructed by, on behalf of, or for the use of a public entity shall be designed and constructed in such manner that the facility or part of the...
-
11B-411.2.1.4.1.2 Identification
Identification shall be placed immediately to the left of the control button to which the designation applies....
-
§ 35.172(c)
(c) Where appropriate, the designated agency shall attempt informal resolution of any matter being investigated under this section, and, if resolution is not achieved and a violation is...
-
11B-206.7.2 Wheelchair spaces
accessible route to comply with the wheelchair space dispersion and line-of-sight requirements of Sections 11B-221 _|Assembly Areas|_ and 11B-802 _|Wheelchair Spaces, Companion Seats, and Designated...
-
§ 38.123(a)
(a) If a restroom is provided for the general public, and an accessible restroom is required by §38.111 (a) and (e) of this part, it shall be designed so as to allow a person using a wheelchair...
-
11B-411.2.1.4.1.2 Identification
Identification shall be placed immediately to the left of the control button to which the designation applies....
-
806 Transient Lodging Guest Rooms
The Board has removed the term"permanently installed" because it is the Board’s understanding that the Department of Justice will clarify the application of the guidelines to permanently...
-
28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities NPRM: Preamble (2008 Title III NPRM Preamble)
of proposed rulemaking (NPRM) in order to: (1) Adopt enforceable accessibility standards under the Americans with Disabilities Act of 1990 (ADA) that are "consistent with the minimum guidelines...
-
Department of Defense Memorandum: Adoption of the ABA and Section 504 of the Rehabilitation Act
, as a matter of policy, the more stringent of either the Uniform Federal Accessibility Standards (49 FR 31528) or the 1991 version of the Americans with Disabilities Act Accessibility Guidelines...
-
28 CFR Part 35 Title II Notice of Proposed Rulemaking (NPRM) - Preamble (published 2008)
notice of proposed rulemaking (NPRM) in order to: adopt enforceable accessibility standards under the Americans with Disabilities Act of 1990 (ADA) that are "consistent with the minimum guidelines...
-
T302 Walking Surfaces
As with our other existing accessibility guidelines for the built environment and other areas, we do not specify in this rule any coefficients of friction because a consensus method for...
-
409.1 General (Section-by-Section Analysis)
ICT subject to the 255 Guidelines would be expressly exempted from the requirements of this section (by proposed C204.1 Exception) because telecommunications equipment generally does not...