The Brewer Assist Power Procedure Table™ can be lowered down to 19" making wheel chair transfers effortless. The 450 lb weight capacity and the additional 5" leg extension...
Search Results "Seating Space"
Filters
Commonly Searched Documents
-
Brewer Assist Power Procedure Table
-
Elements Within Camping Units With Mobility Features [F244.2.3]
At least one of each type of element provided within camping units with mobility features, including outdoor constructed features, parking spaces for RVs, parking spaces for vehicles other...
-
§382.41 What flight-related information must carriers provide to qualified individuals with a disability?
As a carrier, you must provide the following information, on request, to qualified individuals with a disability or persons making inquiries on their behalf concerning the...
-
§382.121 What mobility aids and other assistive devices may passengers with a disability bring into the aircraft cabin?
[See subsections ...]
-
382.121 What mobility aids and other assistive devices may passengers with a disability bring into the aircraft cabin?
382.121 What mobility aids and other assistive devices may passengers with a disability bring into the aircraft cabin? Passengers may bring manual, but not electric wheelchairs,...
-
F232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with 807.2.3....
-
232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with 807.2.3....
-
4.1.2(5)(b)
(b) One in every eight accessible spaces, but not less than one, shall be served by an access aisle 96 in (2440 mm) wide minimum and shall be designated “van accessible” as required by 4.6.4...
-
Pilot Rock B400 Series Sign Bench with Contour Seat
Model B400 Sign Bench – with Contour Seating. Get the word out. Promote an event. Recognize achievement, a donation or memorial. Advertise your business. ...
-
Section B: Passenger Drop-Off Area
Yes No N/A Comments/Remedies B1 Is the vehicle pull-up space on a level surface, with slopes not exceeding 1:48 in all directions?...
-
PART 3: ACCESSIBLE EXAMINATION ROOMS
.); and adequate clear floor space inside the room for side transfers and use of lift equipment....
-
232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with 807.2.3....
-
11B-232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with Section 11B-807.2.3....
-
11B-232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with Section 11B-807.2.3....
-
11B-232.2.1.1 Beds
In cells having more than 25 beds, at least 5 percent of the beds shall have clear floor space complying with Section 11B-807.2.3....
-
Reach Ranges and Operable Parts
OPERABLE PARTS Forward and side reach 11B-308.2/3 Over projections 11B-308.2.2/3.2 Clear floor space...
-
Reach Ranges and Operable Parts
OPERABLE PARTS Forward and side reach 11B-308.2/3 Over projections 11B-308.2.2/3.2 Clear floor space...
-
SEAT HEIGHT MEASUREMENT DETAIL
SEAT HEIGHT MEASUREMENT DETAIL Regardless of measurement technique used, the height is measured at the highest point of the seat, inclusive of bolsters, with the foam in an uncompressed...
-
M102.1 Defined Terms (Section-by-Section Analysis)
decided to add six additional terms to this section; end transfer surface, examination chair, imagining [sic] equipment with bores, imagining [sic] bed, side transfer surface, and wheelchair space...
-
M305.3.1 Length (Section-by-Section Analysis)
The MDE Advisory Committee supported the proposed technical provisions, but recommended adding additional criteria for standing supports on raised platforms with wheelchair spaces....
-
Transfer Supports Location and Configuration M301.3 and M302.3
Transfer Supports Location and Configuration M301.3 and M302.3 Location of the transfer supports shall be a minimum of 6 inches to a maximum of 19 inches from the top of the...
-
Gripping Surface Cross Section and Clearances M301, M302, and M305.2
Gripping Surface Cross Section and Clearances M301, M302, and M305.2 Gripping surface for transfer supports shall be free of sharp or abrasive elements and shall have rounded...
-
28.1 Q. If an architect or builder chooses to follow the bathroom specifications in Requirement 7...are the other bathrooms in the dwelling unit required to have reinforced walls for grab bars?
A. Yes. Requirement 6 of the Guidelines requires reinforced walls in bathrooms for later installation of grab bars. Even though Requirement 6 was not repeated under Requirement...
